Air Venturi Air Pressure Gauge, 6,000 psi, Oil-filled

fast delivery

the guage i recieved is used with dirty oil and threads that have ben doped and mounted . but fast delivery time sent pictures then nothing

The gauge tho small is very readable, However the fluid used in the gauge is cloudy, forms lots of bubbles that don't clear very well and dark.

I have found that after some research, that after draining the fluid out completely and refilling with clear mineral oil the gauge works very well. It is very clear, and bubbles don't easily form or disburse quickly. After conversion I would give the item a "Five Star Rating".

The gauge needs the mod i have outlined above, after that it is a good item for use.

Direct drop in for my Yong Heng compressor.

Fill inside of gauge completely full of oil. Too many bubbles inside gauge make it hard to read.

This gauge is 10 mm. Just make sure that is the size you need. If it wasn't for all the bubbles I would have gave 5 stars.

Mine was old stock going way back. The threads match and it plugged a hole. You can't see the gage because of the brown foam.

No brown foam

It will work to keep your yong heng going.

Gauge is color coded so pressure range is easy to read. Fit my Yong Heng compressor which is a M10 thread.

A better quality control. Gauge has a very large bubble and the fluid is on the yellow side appearing dirty and bits of junk floating around in it.

If you buy this, plan on buying the glycerine to drain and refill the gauge. It not hard to do but I should not have to.

things i dont like sorry. do not buy this one from pyramyd air. mine looked like a used gauge. the threads were dark, just like it had been took off a pump. the oil inside was so dark and full of dirt particles or wood chips, you would have a difficult time seeing threw it. its 500psi off with my other 2 gauges.

check it before shipping it. its disappointing product and inaccurate

you dont want this one. dont try it. mine is the 10mm fits yong heng. i have 4 gauges, two oil filled, one is fantastic on my tank to gun probe. this i put on yong heng and its terrible to look at. i will replace it with something later. happy air gunning friends

It works

Liquid in gauge is yellow, not clear. Gauge glass face has yellow stain on the inside and liquid has black pieces of something floating in it.

Might want to purchase from someone else, this gauge definitely did not go through guality control.

Easy up grade to my Yong Heng compressor

Its a 10mm, not 1/8". I almost ordered wrong one. The original started acting flaky so this was an easy upgrade and so far it works great. Ive filled my tank to 4500psi about 8 times w/ it. And actually is more accurate. I replaced gauge on compressor, gun ( a used Sumatra) and tank (new AV carbon fiber but the gauge started acting flaky too, AV sent me a new one). Now they all read the same. No more guessing. The were all about 10-20 bar ither way from each other. Make sure you get the 10mm gauge for the Yong Heng.

worked good for yong heng compressor

Easy to read and is accurate with my tanks and hand pump. Solid product.

Nothing

I replaced the gauge on my yong heng compressor with this gauge. Works perfect.