Roll over image to zoom in
1-year limited warranty
List Price $54.95 Save $3.00 (5%)
Only 1 left in stock
BKL's patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.
other products by BKL
Create an online review and share your thoughts with other customers
Things I liked: I like this mount a lot! It is extremely solid. I like the six hex head screws to hold your mount to your gun, it will not move. I also used red loctite to give some more insurance. I bought this to put on my gun forever to hand down through the generations.
Things I would have changed: Three Things: 1. The rings only have two screws each. They should have four each. They put so much engineering in the one piece base with six screws to hold the base to the gun securely, but the top end is the weakest link. 2. A stop would also guarantee that their would be no movement, which would be cheap to do and would make it right and insure quality. 3.The price is $55-$60 for that high end price, it should have the above improvements to make it bulletproof and last for generations without any movement.
What others should know: I have 5-6 mount variations. I really do like this mount a lot. My feedback I listed above reflects the things I feel would make it better. I want everyone to know, I do love this mount. I adjusted it on my gun to make sure where I wanted it before I tighten it down. Because of what I feel were the weaknesses of this mount, I then put ample loctite on all six screws that held the mount to the gun. I also did the same to the two screws on each ring after I had the scope exactly where I wanted it. Again, I love this mount but if it had the above engineering changes, I believe it would be Perfect!
Things I liked: Very strong mount. I had a problem with the mounts moving on my gamo bone collector so I decided to give this mount a try. Glad I did. this thing hasn't budged after 1000 shots.
Things I would have changed: nothing...
What others should know: if you are having trouble with your scope mounts moving on your magnum springer this is the mount to get.
Things I liked: This is an excellent product! Absolutely bulletproof. I'm using this scope mount on a Gamo Bone Collector Bull Whisper. Scope - UTG 3-9x50mm with AO (SCP-U395AORGW). Everything fits perfectly and the objective sits about 3/16" above the barrel which is just about as close as I would want it. Tip: Be sure to use Scotch double sided tape between the rings and the scope if your gun is a springer. My scope moved in the rings without the tape. The Gamo has some SERIOUS recoil!
Things I would have changed: Nothing.
Create an online review and share your thoughts with other customers. Show Other Reviews
what are the torqe specks for this mount , bought from you awhile back.
There are no torgue specs for the BKL,. You get it tight.
Does this scope mount have a pin in the bottom? if so, what size?
Will this fit this mount? Hawke Sport Optics Vantage 4-12x50...
Yes, this is the HIGH mount (model BKL-260H where H is for "high"). I have this mount and the Hawke 4-12x50 Airmax scope and there is about 1/8 inch of clearance between the larger 50mm end of the scope and the rifle (HW97KT). The bottom of the scope has protrusions in the middle, near the knobs, and that comes very close to the mount, probably 1.5 mm, but there is clearance and I can see light between the gap. I'm very happy with this mount (and the scope) and recommend checking and tightening the bolts after every 100 shots, as the recoil can loosen the bolts, and it's not a good idea to over-crank the bolts too much and crush the scope tube. The mount has not moved at all on the rifle after about 500 shots, but the scope did move slightly back within the tube mount points, because I was afraid to over-tighten and crush the scope tube. A re-tighten of all bolts after every 100 shots for the first few days will keep everything solid until the bolt tension fully settles in. Alternatively, you can use a torque wrench, but I did not have one that fits non-metric allen bolts.
In almost all cases where the air gun has a 11mm dovetail this mount would work great with that scope.