Roll over image to zoom in
Lifetime limited warranty
List Price $14.99 Save $3.00 (20%)
Create an online review and share your thoughts with other customers
Things I liked: I was indeed able to clamp and tighten these in a way that kept them from moving on my high-powered .22 breakbarrel air rile. They have adhered textured gripping layers on the inside of the rings that don't slip out due to weak glue.
Things I would have changed: Because of the trouble I've had getting other scope rings not to move with each shot, I felt it necessary to wash and blot off all the protective oil that they were coated with. I bought these to replace the stock scope rings that could not hold the scope in place. Although I believe these rings succeeded where the stock rings had failed on my rifle, I was still not able to get my rifle accurate. I don't think for one second that it was due to the rings, these are good scope rings.
Things I liked: Simplicity!
Things I would have changed: N/A
What others should know: The hand pump isnt worth the money spent, it will give you a coronary trying to pump up the air cylinder. A small compressor would be more appropriate!
Things I liked: Excellent set of rings at low cost if you need rings for 3/8" dovetail -- for instance for steel replacement breech for Crosman 1322. They even include an extra screw for clamping to the gun, an extra screw for clamping to the scope and an extra stop pin screw. AND three allen wrenches for each of the three screws.
Things I would have changed: Nothing, they are great.
What others should know: Excellent quality at very reasonable price.
Create an online review and share your thoughts with other customers. Show Other Reviews
Question: The Pyramid Air catalog lists these mounts as "11mm dovetail" but the onsite listing shows them as 3/8. I see others listed as "3/8-11mm" or "9mm - 11.5" Since 3/8" is 9.25 mm, does it make any difference and will a "3/8" dovetail mount" work on an 11mm rail?
If your rail is between 9 - 11.5mm these rings will work
Will these medium mounts work to mount a 6-24x50 scope on a Gauntlet?
No, you'll want high rings
Please provide the recommended torque specs. Thank you!