Leapers Accushot 1-Pc Mount w/30mm Rings, Medium, 3/8" Dovetail

Its one piece

The top of the base hit the bottom of the scope. I had to mill it down to get it to work

Good Quality

Works well

Easy to install, true alignment and securely holds the scope.

Nothing

Solid mount, rubber inside rings keep scope from shifting.

On Remington express 22 ca. mounting a 30 mm tube 50mm OL, had to shim rear of scope

Well constructed.Easy to mount.

If you are going to mount a side wheel suggest you get the mount where it will stay for good first. I didn't and had to remove the side wheel because the middle screw on the mount is barely accessible to the "L" end of the allen wrench and I didn't want to take the chance of "rounding" it.

good solid mount

longer version for bigger scopes

great mount

Works as advertised.

Nothing

Make sure you you order the right mount. If you order a 3/8" unit for an 11mm gun, there will be a slight offset in the centerline between the gun barrel and the scope centerline. This was an oversight I made. I'll be ordering an 11mm scope mount as all of my pellet rifles have 11mm scope mounts.

Less means more and that's exactly what a one piece mount provides, less to go wrong.

Nothing this is an excellent mount and especially so at this price point.

I have purchased and used two of these mounts one on a RWS 460 and one on a RWS 48 and on both mountings upon sighting my scope in windage was off by approximately 1/2" at 25 yards. Naturally elevation needed more correction, but that's to be expected. However, with such a minor windage correction needing to be made that tells me that these mounts are in almost perfect alignment and are very sturdy.

Good, solid dependable mount.

Nix

I like these one piece mounts. So much less to go wrong.

This is an excellent mount. Mount will not move on gun and scope will not slide through rings. 4 screws on scope caps keep scope tube from sliding through rings. You can not beat this mount for the price.

Nothing!

This mount does not compensate for barrel droop. Worked perfect on Beeman R9. Could not use on RWS 54 due to too much barrel droop.