1-year limited warranty
List Price $199.99 Save $20.00 (10%)
as low as $16/month
Bundle & Save $35.00!
Beeman QB Chief PCP Air Rifle
Tech Tip: When mounting a scope with a 40mm objective lens or larger, it may be necessary to remove the rear sight.
A balance of performance, quality features, and price point, the Chief is Beeman's first foray into budget-friendly, entry-level PCP guns.
With a look that harkens back to classical styling, the Chief’s hardwood stock offers a lot to love over its synthetic counterparts. Each stock is proudly embossed with yellow-hued Beeman logo. This airgun steps up the game with an adjustable 2-stage trigger—a great feature for an entry level PCP. For sighting, shooters can use the included fiber optic sights or mount their optics to the 11mm Dovetail rail for precision shots.
Filling to 2000 psi, users can easily fill their Chief's 136cc cylinder with a handpump, or small tank for shot after repeating shot. Load up a pellet and send it spiraling downrange at speeds up to 1000 fps (in .177). Beeman’s specs claim this PCP can shoot up to 50 rounds in .177 or 35 in .22.
If you are looking to break into the exciting world of PCP airgunning, grab the Chief, and be pleased with its performance, quality, and its price!
|Max Velocity||1000 fps|
|Front Sight||Fiber Optic|
|Rear Sight||Fiber Optic|
|Suggested for||Small game hunting/target practice|
|Max Shots per Fill||50|
|Cylinder Size||136 cc|
Create an online review and share your thoughts with other customers
Things I liked: For an entry level rifle, the quality is awesome. Very accurate with the Crossman 14.3 grain pellets. It is louder than most, but it feels like you are actually shooting something. Using the Hill hand pump for fast fill ups.
Things I would have changed: Nothing.
What others should know: If your looking for an entry PCP Rifle with a little extra pop too it, I would pick one up here at Pyramyd Air! Rings and a scope will put the finishing touch on this good looking Rifle.
Things I liked: This gun is strong. For 159.00 I was not expecting its power. I wanted a cheap plinker that was easy on air and had shot count. I got what I wanted and some power. I zeroed the iron sights at roughly 25yd. It was sending the 14.3gn crossman premier HP on top of each other. The trigger isn't even that bad but I will adjust out some creep and lower pull weight. Things I like... THIS GUN. I did opt for the 10 for 10 service on this gun just like I did on my .25 Marauder that is still untouched and unserviced since purchase in 2012. It does not leak either. Pyramyd Air really goes over the gun and makes sure you are getting a good one. That service is worth the coin.
Things I would have changed: Not much to complain about for the price point its a good FUN gun. Its not my .25 FX Impact or my .25 Marauder. It delivers at its price point.
What others should know: My bolt is rough and the pellet probe tilts the pellet forward when closing the bolt. It doesn't seem to affect accuracy much if any. This is the gun that gets you hooked. Buy one come shoot with us.
Things I liked: Beautiful stock very accurate
Things I would have changed: Nothing
Create an online review and share your thoughts with other customers. Show Other Reviews
Beeman PCP chief air leak. I found the leak around the pressure gauge. I replace the o ring and it still leaks. I put teflon tape on the treads and it still leaked. I tried gas line tape tape and it work better but still leaked around the treads. I can pump the gun up to 1600 psi and no more. It leaks around 100 psi in 2 or 3 days. I was thinking I might try 2 o rings seals or some pipe dope maybe anti seal. Any other thing to try?
does anyone know if they have come up with a multi shot conversion so u can add a magazine to this one like they did with qb78 models. also U CAN ADJ. THE SHOT PRESSURE SOME SO U CAN INCREASE THE AIR RELEASE OR DECREASE IT SOME AS U WANT BUT BE CAREFUL , also know that they have come up with a better bolt so that it is not so loose fitting, u also need to bouble up on the bolt sealing o-ring and ck to see if there are any burs in the breach where the o rings seal
Care to elaborate on where your finding the Magazines? Looking to buy another Beeman from you. Email me if you don't want to post it.
I found two sites for good magazines for this rifle
When I shoot my qb chief, it makes this weird that sounds like a machine gun. The sound lasts from half a second to a couple seconds, and when this happens it wastes a ton of air. I don't know if it's the cold weather or the O-ring has bursted. Please help cause I'm thinking of returning it in for a Benjamin maximus
It's called hammer bounce. The hammer is repeatedly knocking the valve open before coming to rest. Typically it's caused by either too much hammer strike (too much hammer spring preload) or by continuing to shoot the rifle well below it's optimal operating pressure. The newer Chief rifles have an adjustable hammer spring...try backing it off.
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Beeman QB Chief PCP Air Rifle with quick-disconnect connector (1M)
To start over click reset
|Max Velocity||1000 fps|