Daisy Shatterblast Six Shooter Target System, .22 Caliber Max

Super-cheap and easy to set up. Includes a pair of single-disc stakes.

It comes with just enough discs to get the idea and then you run out. Wish it came with twice as many.

You can get replacement Shatterblast discs in packages of 60, if you can find them. Right now, it's hard to locate them at all.

Function once I figured out how it assembled. Instructions tell where the post go but they need to be hammered in. Make sure the post are aligned or you make it harder to push into ground. FYI if you try to see the stacking action before you install the posts the discs fall right thru. I read of some breakage of the stacker after being hit by pellets so I hedged my bet by gluing on a rubber pad as a buffer. Time will tell if it works. First run thru with a co2 rifle was great, they drop down INSTANTLY! So quick I thought I had missed until I counted the discs left thru the slots. Buy a ton of refills!

Thicker plastic on the front half to prevent breakage

Everything, holds six discs, pretty cheap, and bio friendly!!

THE INSTRUCTIONS!

Ok, I read the other reviews and decided to buy this anyway, if nothing but for the 2 spikes and discs(the spike pack is only a little bit cheaper and I wanted to see what everyone was talking about). Here is what I found out. IF you follow the directions that come with it to put it together it will not work correctly, you have to add a 4th step or read into the 3rd alot more. The washers need to be as far as they can be against the base. This means you have to use a pair of pliers to push the post past the first stop and up to the washer itself (hammer may bend the post). After doing this it works perfectly! Happy shooting!

i like that it can hold 6 of the discs. also it is made a good material so it wont crack if you drop it. it also comes with metal stakes so they wont be bad for putting in the ground. it comes with 2 of the single holder stakes. that was good because i couldnt get the six shooter working at first.

i would change the size of the washers at the bottom or some other way to keep the discs in their better because they really do not stay in their after the first disc falling. the longest record of continuous discs i had was 2. :(:(:( not very satisfied but i will make a base out of some spare to help hold them.

i leaned the six shooter holder away from where i was shooting and it seemed to hold better, but not well. if u buy this make a stand or somehow put bigger washerson. if u can put bigger washers on and it works please tell me, it would be greatly appreciated.

Not much about this. It is very hard to get it setup so that the disc's don't just fall out. I can't get it so that only 1 disc is showing. I always have the next disc over lapping the bottem one.

Better drop system or, just sell it with 6 single disc stake holders.

Save your money, Get the stakes and buy a box of 60 disc targets. Kids (And Wifes) love to blast these things.

I like the way that the target disks automatically index by dropping down when the lowest one is fully shattered.

Please package these with greater care, as mine came with one of the target stakes jammed inside the plastic disk chute to the point that I mangled up the interior of said chute rather badly.

I was surprised with the durability of this target system, as it withstood a direct hit from Crosman Ultra Magnums, showing only a small dent.
It appears that the plastic disk chute is molded of Lexan...very good choice there.