by B.B. Pelletier
Part 1
Part 2
Part 3
Part 4
Part 5
TalonP air pistol from AirForce is a powerful, new .25-caliber pneumatic hunter.
It was another calm day at the range last week when I tested the TalonP air pistol once again. This time, I had a couple special goals. One was to see if the new method of scope mounting recommended by AirForce owner, John McCaslin, would help me hold the gun better, and the other was to test the velocity of the gun with the most accurate pellets on power setting eight.
New scope mounting method
The scope has to be moved forward for increased cheek contact with the reservoir/tank. You know that I’m now using the optional shoulder stock extension that clamps onto the pistol’s reservoir. The way it clamps gives you a wide range of pull lengths. I need a longer length of 14.5 to 14.75 inches, so I have the extension way out at the back of the reservoir, but most shooters will slide it in a bit. John recommends that you adjust the stock first then position the scope where it needs to be for your eye. He recommended a BKL cantilever mount that pushes the scope forward. I used their BKL 4-inch one-piece mount with what they refer to as drop compensation, which actually means droop. Because the one I had on hand has one-inch rings, I had to say goodbye to the superb Hawke 4-14x42AO Sidewinder Tactical scope I’ve been using and substitute a Leapers 5th Gen 6-24x50AO scope. While it was entirely adequate, I have to observe that the Hawke at 14x was clearer than the Leapers at 24x.