Hatsan Air Stripper, For Select .177-Cal Hatsan Air Guns

it fits more airguns than you think. like my walther terrus. add a spot of machine grease to hex head adjustment screw.. as if you will need to adjust it . puts up better groups. use crosman ex destroyers only. cheap. effective. range worthy. a great little unit. should not give your rifle barrel droop.if not cheap.

nada

The price was right and it looked liked it might work for my LGV Master (based on the other reviewer who had it on his Walther Challenger). The machine work and finish was acceptable.

The depth of the threaded section of the stripper was too deep for the LGV and the center section of the stripper could not adjust close enough to the barrel end for my liking so I returned it.

This stripper did fit onto my LGV but the 20mm thread depth (compared to the 11-22mm threaded barrel end) created too much space for the center section to adjust to. I ended up ordering a Rowan Engineering unit and while that cost a lot more, it was a much higher quality stripper and I could adjust the brass center section closer to the barrel end than this Hatsan unit.

Accuracy is good after putting it on!

make the metal on the thinnest parts thicker, so they can be safely used as leverage for breakbarrels

HAVE CAUTION when using on a break barrel, don't put too much pressure on this. Mine feels solid, but somewhere online I saw that someone used this as leverage and it broke and cut open their hand. I'm currently just grabbing the barrel itself and cocking the gun, which is no biggie.

smaller groups

nothing

put this on my lgv challenger ultra and I'm consistently shooting smaller groups with several different kinds of pellets

Very well built, nice finish it's very adjustable and should also help with accuracy if setup correctly.

The brass cone is nice but adds a ton of weight, now if used on a rifle as intended its fine. I used mine on a pistol and adds a lot of weight at the end of the barrel. It would be nice if the cone was made from aluminum as it would accomplish the same thing in the long run but would be lighter.

Nothing..

Quality made and easy to install and it works very well improved my groupings at 50 yards.

Nothing I can think of.

I was happy I was able to get better groupings at 50 yards and really makes my Hatsan BT65 SB Elite look pretty cool!!

Looks very cool, well made. Can not say it helps with the pellet accuracy.

Nothing.

Screws on to the end of the barrel.

it screws right on looks good and it is fully adjustable

Well made for the low price.

Make it with lighter materials.

Stripper is adjustable.