UTG Max Strength 30mm Rings, Medium, Weaver/Picatinny

Great scope rings . Will order these again.

Nothing at all.

Great product and works very well

Very Light

Very Strong

They look solid. I would like to mount them on a rifle, But it is back ordered and I'll just have to wait and see what happens when I get the rifle. Shipping was fast as usual, price of the rings was very good. They don't look like they are built like a tank but close. I love them on my other rifle with a 3-9X40 UTG with a 1 inch tube. It's solid as a rock on that rifle (Benjamin Steel Eagle .22cal Jim Shockey version). That rifle kicks hard with the NP2 spring piston! So far so good.

Nothing

For the money you spend on these rings you cant go wrong.

Mounted up on the M-rod field and target very well did not have to lap the rings in. They were rite in line.

Nothing

do not like this mount. I have contacted UTG on this mount with the issues and they still produce this ring with failure even on pcp guns

Change the attachment rail. I HAVE HAD NOTHING BUT FAILURE WITH THESE MOUNTS

This mount will crack on the attachment to the rail. Also on Flex weaver rails this mount will cant

I have used these rings on several of my rifles and have always been satisfied. They can't be beat for the price.

Nothing.

Buy them and you want be disappointed.

The look /finish and the price are pretty good. In the delivered Pack was everything you need , wrench and even a spare srew ...very good the spring behind the locknuts is a nice thing to , you cant lost the fixing screw/nut. a wide base for fixing on the rail is allways an advantage . and looking underneath is not impossible for the iron sights the combination with the barrel droop compensator rail ( 11 mm to weaver/picatinny ) is rock solid on my Diana/rws 48 with 25 J + i lost some scopes from the rail in the past , this one doesnt move ( in combination with the rail adaptor )

i got some Problems with mounting my swfa ss 16/42 with it , it does not fit super snug into it , somehow it looks like the inner radius of the half pipes is a bit smaller than the 30 mm scope . i had to open it up a tiny bit for correct seating of the tube. i measured the tube its between ( depending in two calipers ) between 29.95 and 30.05 ...the inner diameter is not so easy to measure without removing the slip tape , but mut first guess is 0.05 mm to small but that is the range for guessing with a standard caliperover all its just taping/laping 5 minutes with 400 core paper and everything fits nice and snug

i use this on a diana/rws 48 ( tuned ) with the barrel droop compensator , so far it is rock solid and works well , its almost good enough for seeing through the mounts for your iron sights .i have no doubt that this stops pretty good in combination with the rail the scope from moving on a 25 J + springer .

Great value for the buck!

Nothing.

Don't hesitate to buy these, you won't be sorry. They even include a wrench and extra screw.

It's pretty well made actually. Durable, fits scope assembly very nicely. Just like what it reads... Max Strength And the price is great, I think.

Nothing really, it's what I was looking for.

There are lots of scope rings out there, but can't beat these, for what they cost.