*Some items excluded. Can be combined with free ground shipping on orders $150+, to the contiguous US. Expires 6/1/19, @ 3:00 a.m. EST
Roll over image to zoom in
1-year limited warranty
List Price $219.95 Save $11.00 (5%)
as low as $19/mo with
other products by AirForce
Create an online review and share your thoughts with other customers
Things I liked: Very very accurate. Great upgrade if you want more down range power or wind resistance.
Things I would have changed: With so many people using bullets instead of pellets it would be nice if these had a longer chamber that could more easily accommodate a longer projectile. In my two 22 cal barrels the chamber is smooth and then abruptly the rifling starts. A bullet could be inserted a certain amount and then it would stop cold at the start of the rifling. That was certainly a pain. Now this barrel is different in that it does seem to have a leade but it starts right at the breach. So still not quite right. A combination of a short part of the barrel with no rifling combined with a leade would make this amazing and more bullet friendly.
What others should know: Very heavy and will definitely shift the balance of the gun forward if you had a SS barrel or any shorter barrel. With this barrel and no additional aftermarket parts(just some adjustments here and there) I'm maxing out at around 100 FPE with 53 grain bullets.
Things I liked: One of the best option to get if you have a .22 Airforce Condor is to get the .25 24 inch then the .177 cal barrel. The only thing from keeping me to buy the .177 is that you have to spend another $200 for the .177 airtank. Takes 5 mins to install with just 1 Allen wrench. I'm loving mine. PRETTY accurate.
Things I would have changed: Nada
What others should know: Get it.
Things I liked: Wow, This new Lothar Walther choked barrel rules. Pelet on Pellet at 40 yards!
Things I would have changed: Nothing
What others should know: Easy to install
Create an online review and share your thoughts with other customers. Show Other Reviews
By putting this 24 inch barrel on a TalonP, will this essentially make it an Escape with the same performance?
Before shipping, can PA do a 1/2 x 20 threading on the end of the barrel to add a moderator?
Yes, you'll want to call customer service or the tech department at PA to have that service set up on your order and priced.
Can I make my .177 condor to .25 cal with this barrel?
Yes, but you will also need a different cylinder for the .25 barrel. AirForce Spin-Loc Hi-Flo Air Tank,...