888-262-4867 (GUNS)Deals888-262-4867 (GUNS)Deals
Out of Stock
Create an online review and share your thoughts with other customers
By Christopher from USA on 2018-03-11 11:16:23
Things I liked: Well made and a good value for the money.
Things I would have changed: I would like to see a 45 degree fitting on the base. So when it is attached to the pump, it is vertical. It won't work any better, but it would be visually pleasing to me.
What others should know: A must to protect your airgun from humidity.
By Dennis from USA on 2018-12-18 18:51:43
Things I liked: Seems to work and every little bit helps keeping the air clean and dry. The filter at the top came off when I removed the cap. I super glued it back on and have had no problems since.
Things I would have changed: I would integrate the filter into the housing better.
What others should know: Watch the filter at the top. It doesn't take much to pull it off.
| Sort by: | Date
| Helpfulness
| Rating
|
|---|
4.0 4.0
4.0 4.0
Verified Purchase
Things I liked: Easy to install. Comes with extra o-ring for seal. Has 2 packets of desicant, so there is a spare.
Things I would have changed: Better cap for sealing out moisture on the inlet when not in use. The sintered metal inlet filter is kind of fragile and sticks out from the pump when installed.
What others should know: Seems to work ok.
5.0 5.0
5.0 5.0
Verified Purchase
Things I liked: W e my on pump easy. No problems.
What others should know: Must have if you have the Benjamin hand pump
5.0 5.0
5.0 5.0
Verified Purchase
Things I liked: Easy to assemble and mount.
Things I would have changed: Nothing at this time. Hard to know if it's working since you can't see the water in your PCP gun!
5.0 5.0
5.0 5.0
Verified Purchase
Things I liked: Well made and a good value for the money.
Things I would have changed: I would like to see a 45 degree fitting on the base. So when it is attached to the pump, it is vertical. It won't work any better, but it would be visually pleasing to me.
What others should know: A must to protect your airgun from humidity.
| By Gary from USA on 2018-05-24 |
|
3.0 3.0
4.0 4.0
See all my reviews
Verified Purchase
Things I liked: Seems to work and every little bit helps keeping the air clean and dry. The filter at the top came off when I removed the cap. I super glued it back on and have had no problems since.
Things I would have changed: I would integrate the filter into the housing better.
What others should know: Watch the filter at the top. It doesn't take much to pull it off.