Air Venturi Intermount, Fits Benjamin Sheridan Multi-Pump Rifles

I had tried several methods to mount a scope on my Crosman 180 and this was the only method that worked! It's solid and the scope, a Crosman 4x32WR seems to be holding a zero at 20 yards. I know it's sacrilege to put a scope on this old gun but my old eyes are just not up to the task anymore!

I would not change a thing!

To mount the Air Venturi Intermount to a Crosman 180 you first have to remove the breech plug screw and then loosen the locking screw at the end of the bolt so the bolt handle can be removed. Then you can slide the two mounting brackets down the barrel and locate them for the Picatinny rail. Reverse the process to reassemble the gun. Mount your scope and you are good to go. The two mounts fit like they were made for the gun!

I wanted to scope a Crosman 180 and this Air Venturi Intermount kit does the trick. It fits well while still allowing room for loading pellets.

Maybe a couple more holes in the rail for different types of scopes with not so good eye relief.

just liked everything

nothing

needed for the benjamin pump 392. with out this product, the benjamin 392 is worthless..

Quility of product. Speed of delivery.

It will be another month before I'll be home to try the product.

It let me put a scope on my old Crosman 1400 (not a 140)

more mounting holes

A 140's breech and barrel are different sizes)

Sturdy construction, snug fit. It doesn't feel knockoff-cheap.

It's not obvious that this ISN'T one-size-fits-all. The 397 Carbine I got it for doesn't have a long enough receiver for the clamp spacing. However, that is a particularly rare model and so it's an edge case.

You can actually clamp this to the dovetail on the Crosman steel breach that is an option for the 2240 and is used on other Crosman models. It doesn't quite stand high enough to work well as a see-through mount, but it does elevate the rail nicely enough to be able to load pellets underneath it.

Its adjustable

Nothing

Works well!

It's sturdy and well-made, although the tightness of the mounts on my 392 wasn't exactly consistent. One slid into place easily, the other required some pressure. The Pic rail is nicely machined.

It's not the Intermount's fault, but the listing needs to be clear that this isn't a universal fit. My (admittedly rare) 397C compact version of the 397 does not have a long enough receiver to fit the mounts.

This mount will boost your scope up like it's on an M16 carry handle. I went from a cheek weld with my Williams peep sight to a chin weld with my knockoff Bugbuster scope.

WELL MADE

Fit my Benjamin Multi-Pump perfect ! Hold the scope in place with no problem.

Nothing!

If you own a Benjamin Sheridan Multi-Pump Rifle this is the way to go to add a scope !