Air Venturi Dueling Tree Airgun Target

the idea

make it work, multi pump is not enough and breakbarrel is too much

when it finally moves it usually bounces all the way back. don't waste your money

Good quality

Product is listed for air guns. It does not work with CO2 pistols. Rifle is ok.

Well built

Pellets do not move the paddle targets

Works well and easy to put together.

It could use two more targets.

You will need a .22 to get them to swing. I think a .177 ant going to cut (swing) it.

The large base makes setup easy un uneven terrain

Quality of construction. The latching mechanism could be much better. The top paddle on mine broke on the third hit and it doesn't look like the others will last much longer. With higher power PCP airguns .25caliber and up, the paddles tend to flip over and bounce back. With CO2 power air guns you have to hit the very edge of the paddle to get it to flip.

This is only suitable for break barrels that are .22 caliber. Any more power and you will damage the stand. Any less power and the paddles will not move. I expected better for the price, honestly.

Not much.

Needs to be more robust. .22 pellets from my FX Crown immediately started denting the plates, then shredding the mechanism. Maybe better for .177 than 90+ FPE PCP .22

Consider getting an actual .22 rimfire tree.

I like the way it was made

the springs are to strong to push over even with my MPX range of 18 ft I am going to put lighter spring or cut this one down

The concept

The size & strength. Read the dimensions, this thing is far smaller than what I had expected from previous experiences with other siimilar types.

In my opinion this target is not even viable. If it works at all, it would appear to be limited to a narrow band of power range. Reviews revealed that low power guns are not capable of actuating the mechanism, while higher power guns bend the metal & brake the spot welds. After assembly, knowing that it seemed to be of light construction, I placed it out at 70 yards & fired my 22 cal PCP rifle at it. Even though the power of my rifle severely damaged the target paddles by bending the light material & braking spot welds, it still failed to opperate correctly. I am returning it & would definately not recommend it to others.

Heavy base holds it in place very well.

Strong welds.

A 1000fps 0.177 isn't going to move this target. A 600fps 0.22 broke it's welds.

Good idea works with bigger air guns

I'm not sure how but make it work with the crossman 1077

It take more than advertised to flip the paddle my beeman r7 can't do it and if I'm remembering right its shooting a 7.9 cphp at around 700 fps