Umarex Origin PCP Air Rifle

Most everything

Bigger cal Bundle deals

I’ve had this gun 4yrs and I left it in storage 2.5yrs and it still holds same air and just like I left it overnight, definitely met my expectations!

I put a $100 scope on it and it’s extremely accurate shot!
So now you know

I’m a newcomer to air guns and this is our first air gun. Must say that this is a really nice setup. This gun was exceptionally accurate right out of the box and is such a pleasure to shoot. This pcp is mainly for my wife to shoot and she can get 50+ shots without needing to refill.

Nothing so far.

Gun will be used for target shooting from a bench rest, so no comments regarding weight for hunting purposes.
We bought the combo package that in included the hand pump. I’m 67 and have no trouble filling the gun with the hand pump, though the pressure from 3,000-3,500 lbs does take a bit of effort. So far the gun has exceeded my expectations and I think it is a great value.

Everything, the weight is good, filling is a snap, and really packs a punch on the furry tails

Nothing, it's very good

Make sure and get a electric portable pump, makes thing so much easier.

I was Goin too give 4 stars only because no studs for sling.however I just shot another rabbit poke-in it's head in my garden this evening..5 stars for sure.crazy accurate and plenty of power.

Add studs

No need too spend more money on (better models) unless ur competition shooting or something.

Takes only 60 pumps to get to 3500 psi from 2000 psi. I never let it go below 2000 psi and never go past 3500 psi, dont want to chance the ept piston to seize up. Good accuracy (1 inch group 50 yd), its not a fx airgun (1 moa gun), but its also not 2200.00 either. Light weight, great for hunting. Gets 40 good shots before hitting 2200 psi. Mine loves cheap crosman jhp pellets, so I lucked out on this purchase.

Wished it used a regular fill probe nipple like the avenger, and not a proprietary fill probe. Add swivels on the stock for sling attachments. Make the barrel shroud metal instead of plastic. Provide a single shot tray with the gun. Provide iron sights on the gun. Have a more of simple design so customers can maintain their gun without sending the gun to the manufacture for repair. Tighten the scope mounts before shipping it out, mine was about to fall off the gun.

The gun is hold sensitive, so back off about 6 inches away from the barrel band wand youll be ok. I was resting the gun on the sand bag where the barrel band is located and got sporadic groups. My gun was leaking air the first 2 days evertime I hit 2900 psi, but it fixed itself somehow. Once I hit 2900 psi, air was coming out and couldnt pump any further. Thought it was the fill probe, but it was fill probe hole on the gun. After ten sessions of pumping, I was finally able to get up 3600 psi without any leaks. I think the ept system just needed breaking in since its new technology in pcp. It has zero leaks now. So if yours leak around 3000 psi, just shoot it til it gets down to 2000 psi and re-pump it up, do that ten times and it should be able to get to max pressure. This gun was also my 2nd origin gun, thanks for PA great 60 day return/exchange policy (exchanged first origin because something was wrong with the ept system/tank, couldnt pump no more than 20 pumps before it hits 3600ps

finally a pcp that does not need a ridiculously expensive compressor, or tank for the dive shop trip, or a thousand pumps on a hand pump, and this thing comes with a hand pump! it's nice to have ten easy shots, loading the magazine takes a workbench and a light and beer, the rounds stick and go sideways when trying to load cocking lever is great Picatinny rail is great, too bad the magazine goes in the middle... my single piece scope mount wants to go over the magazine slot but prevents the magazine from loading. this is a serious design flaw. the pump works great

the fill probe is awful, takes too much turning, pushing and fiddling to get to the fill position... there is no way of telling when it is finally at the fill position, have to file in your own marker, a quick disconnect or just a simple screw on would be much better. the fill port, de-gas ports on the bottom are ok, not great but at least functional. the plastic cover over them just plain sucks... I just tore the damned thing off, now I have to be careful not to loose it so I can stick it back on after shooting. a removable water tight cover would be better, but can't be a flimsy plastic thing the split Picatinny rail need to be a solid piece or the magazine needs to be lower so it does not interfere with the base of the scope mount I wish the pump base was 6" higher, it gets real tiring to have to make that knee-bend to press down to the very bottom this has a cheek rest but...make the stock removable so the user can customize. it's a long rifle, so a folding stock would be useful

use low profile scope mounts for short range varmint shooting, there is never enough time to calculate your range, so low profile gives a more consistent zero

I love this gun its very quiet and hits hard and the accuracy out of the box is amazing

Nothing

My first pcp and its amazing you wont be sorry

Accurate right out of box!

Good scope combo alternative.

Hand pump not good for 70 year olds.

price, accuracy (within reasonable distances), weight, easy fill w/ hand pump.

add silencer, wish it has build in sight.

first of all, I purchased this at pyramyd air. great service from them.
I also purchased 10 shots service just in case. it's a cheaper option than having to send the gun back because it's faulty.
i bought it for plinking, wow almost to powerful for it. also use it for pesting, i attached atn 4 k pro, i know that is a lot of scope for the origin, but its one scope that will do it all.
great pcp value indeed.

Great accuracy, plenty of power, good shot count, easy to hand pump. Good looking and great shooter.

nothing

It's great buy it