Date: 7/6/2020 2:55
0

Customer Reviews for Air Venturi Barrel

Average Customer Review

4.5 (3 reviews)
3 star2 star1 star
Air Venturi Barrel
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By Richard from USA on 2017-12-23 10:49:36

Things I liked: Love the new rail turned my wing shot 1st gen into the new wing shot 2 , a much nicer sight picture,also added the new matte finish end peice and the new and improved tighter choke tube , a major difference in sight pic. and over all awesome looking shot gun. Thank you Pyramyd air Best regards from Tobyjoe.

Things I would have changed: Nothing at all

What others should know: Buy the new peices and you wont belive how much more awesome the gun looks and performs.

The most helpful critical review

0 of 0 people found the following review helpful:

Overall rating:4.0

Value for money:2.0

By deerflyguy from USA on 2019-06-03 08:41:08

Things I liked: I like very much how this vent rib barrel rail improves the appearance and sight plain for the 1st variation Wing Shot. I would buy it again even though it seems to be overpriced. Most air gun accessories are, so that doesn't turn me off as I knew that before I made the purchase.

Things I would have changed: I would expect to find instructions included with the part since it is an improvement to an existing airgun and there are specific things that one must do in order to make the alteration successfully and without damaging the gun. It is a little tricky to accomplish, so instructions are necessary, but missing.

What others should know: There are NO INSTRUCTIONS included with this part! None at all! The buyer must figure out what to do without instructions either written or through diagrams! That might not seem important to some, but to others less mechanically inclined I assure you it is mandatory! What I initially believed to be an easy addition turned out to be several calls to PA and discussions with customer service, sales, and finally tech support. Eventually, I was able to make the installation without damage to my gun, but not without considerable unnecessary wasted time and complexity. What should have taken ten minutes, if instructions had been included took nearly two hours instead.

Sort by:
  • 5.0 5.0

    5.0 5.0

    By W.A. Steven from Canada on 2020-03-09
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Makes the gun that much better looking

    Things I would have changed: To have simple instruction included, as once explained it is very easy to install

    What others should know: All of the air needs to be out of the reservoir, and the screws that hold the barrel in need to be backed out and the front sight assembly and the rear mount. Also, the choke, fill port and front retaining ring (at the front of the reservoir, beneath the muzzle. It has four holes in it) need to be removed. The front sight assembly can then be pulled off, This can be hard to get off sometimes as it is snug over orings. Once those parts are removed, the barrel can be slid out.

     
  • 4.0 4.0

    2.0 2.0

    By deerflyguy from USA on 2019-06-03
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: I like very much how this vent rib barrel rail improves the appearance and sight plain for the 1st variation Wing Shot. I would buy it again even though it seems to be overpriced. Most air gun accessories are, so that doesn't turn me off as I knew that before I made the purchase.

    Things I would have changed: I would expect to find instructions included with the part since it is an improvement to an existing airgun and there are specific things that one must do in order to make the alteration successfully and without damaging the gun. It is a little tricky to accomplish, so instructions are necessary, but missing.

    What others should know: There are NO INSTRUCTIONS included with this part! None at all! The buyer must figure out what to do without instructions either written or through diagrams! That might not seem important to some, but to others less mechanically inclined I assure you it is mandatory! What I initially believed to be an easy addition turned out to be several calls to PA and discussions with customer service, sales, and finally tech support. Eventually, I was able to make the installation without damage to my gun, but not without considerable unnecessary wasted time and complexity. What should have taken ten minutes, if instructions had been included took nearly two hours instead.

     
  • 5.0 5.0

    5.0 5.0

    By Richard from USA on 2017-12-23
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Love the new rail turned my wing shot 1st gen into the new wing shot 2 , a much nicer sight picture,also added the new matte finish end peice and the new and improved tighter choke tube , a major difference in sight pic. and over all awesome looking shot gun. Thank you Pyramyd air Best regards from Tobyjoe.

    Things I would have changed: Nothing at all

    What others should know: Buy the new peices and you wont belive how much more awesome the gun looks and performs.

     
Navigation