Date: 14/8/2020 13:38
0
Contact Center Communications Notice!Click here for details.

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black

4.56 reviews
BKL 1-Pc Adjustable

Roll over image to zoom in

Share your images

1-year limited warranty

PY-A-4134

$66.95

List Price $69.95 Save $3.00 (4%)

Pre-order

Out of Stock

Click to get email when it's in stock!

Estimate Shipping

Estimated in-stock date 08-31-20
Place your order now for delivery priority!

Add to Compare
Add to Wish list

  • Made in the
    Made in the USA.

This product is out of stock.
Estimated in-stock date 08-31-2020.
Place your order now for delivery priority!

  • 1-pc scope mount
  • 3/8" dovetail
  • Low profile
  • 1" rings
  • 2 screws per ring cap
  • Adjustable height to accommodate barrel droop
  • 3/8" side rails for mounting other accessories
  • 2.5" of clamping length
  • 4" overall length
  • 120 minutes of angle adjustment (2 degrees of angle)
  • 4.5 oz.
  • 6 base screws
  • Matte black
  • Includes 3 hex wrenches

Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.



Item Code: BKL-288-MB [PY-A-4134]

other products by BKL

Average Customer Review

4.5 (6 reviews)
3 star2 star1 star

Create an online review and share your thoughts with other customers

5.0 5.0

4.0 4.0

By Allen from USA on 2019-09-01
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: This is a really slick design that allows you to adjust for severe elevation problems like barrel droop where scope reticle adjustments could become maxed out. The dovetail mount design is unique to BKL and locks onto the rail with six socket head cap screws so slippage on the dovetail is not going to happen. First I center the windage and elevation adjustments on the scope reticle , then position the scope on the rings and adjust the elevation screw for a trial and error tryout. The rings float independently and their lock screws (button hd cap screws directly under each ring) and ring screws should be left loose until the desired elevation has been set by the large head adjusting screw located near and under the rear ring. When this elevation screw has been adjusted with the bottom of the scope tube resting on it, snug the ring caps down. This will draw the bottom half of the ring up to the bottom of the scope tube. Now tighten the button head screws and lock everything down.

Things I would have changed: Better instruction. Instructions included in the package don't explain very well how this system works and how mounting and adjusting should be done. If you look on BKLs website, you will find a video which covers their products in general with a short section explaining how this mount functions but this also does not present a clear picture. If you order one and play with it a bit, you can figure it out but better instructions would certainly help.

What others should know: BKL mounts are unique in that they are designed to center precisely over the center of the rail. Single piece mounts like this one usually have six mounting screws that lock down so tight, no scope stop is required. High power breakbarrels can loosen screws, and scope ring screws are vulnerable. A little blue loctite #242 helps after the scope is zeroed.

 

5.0 5.0

5.0 5.0

By Richard from USA on 2016-09-23
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Does what it's supposed to do, mounted the BSA Essential scope 3x12x44 plenty of clearance, and the adjustable droop made it easy to center adjustment on elevation before final sighting in. Also like the auxiliary rails on the sides for any gadgets you might want.

Things I would have changed: no issues yet.

What others should know: Use the pyramid air website, there's a lot of useful information on the way to go with setting up and using air guns and accessories.

 

4.0 4.0

4.0 4.0

By Michael from USA on 2014-03-09
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Of course that it's adjustable. It is made in USA.

Things I would have changed: Might consider a two bolt scope ring set up.

What others should know: This is my second adjustable mount, the first worked great, this one had some burrs along the inside that would not allow adjustment until removed. I'm guessing one poor QC slipped through as the first one was perfect. The instructions could also be slightly more detailed. You also might consider, as I did, applying a small amount of grease to the screw threads before assembly in case disassembly later is needed. Overall a good solid product that does what it's supposed to do.

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • Paul from USA asked:

    I used a Beeman on another RWS 48 with UTG 3.9, and it tends to sit a tad bit high. Does anyone have experience with this one and it's lower height on a RWS 48 with a UTG 3x9?

  • Allen from USA asked:

    Is the 120 MOA adjustment range in one direction from zero or is the adjustment 60 MOA up and 60 MOA down?

    • Tyler from USA:

      120 includes the up and down range of movement.

  • Aries from Philippines asked:

    Does BKL has a picatinny adaptor for this? If yes, which is it?

    • Tyler from USA:

      If you mean a version of this mount that can attach to a picatinny rail, then no, they do not.

See all discussions

This product is out of stock. Estimated in-stock date 08-31-2020

Compatible with BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black

BKL Scope Bubble
BKL Scope Bubble Level
4.511 reviews
$19.95$18.95
Pre-order

Out of Stock

Navigation