Roll over image to zoom in
30-day limited warranty
Earn 170 Bullseye Bucks
List Price $189.99 Save $20.00 (10%)
as low as $15/month
Only 1 left in stock
Black Ops Tactical Sniper Air Rifle
Benefits of a gas-piston powerplant over a metal mainspring:
The manufacturer claims this gun delivers .20-inch groups (center-to-center) at 10 meters.
This is a breakbarrel air rifle, but the manufacturer has installed a bolt to give this air gun a more authentic tactical look. The bolt is non-functional.
Where most tactical shooters only launch BBs, the Black Ops Tactical Sniper is something special. Instead of a smoothbore BB rifle, this rifled gun will give you more accuracy than ever with lead pellets! Featuring and adjustable comb, you’ll have no trouble finding a comfortable hold. Each Sniper Air Rifle includes a 4x32 scope or removable fiber optic sites if you want to test your shooting skills. The adjustable bipod attaches directly to the forearm so there’s no need for awkward barrel clamps or added adaptors. Go prone, post up, and send some lead downrange!
|Max Velocity||1000 fps|
|Cocking Effort||44 lbs.|
|Suggested for||Small game hunting/plinking|
Create an online review and share your thoughts with other customers
Things I liked: Fun factor is high. Looks great and easy to cock.
Things I would have changed: Have the trigger adjusted to about 75% less than the current 10 mile road march in the mud. Have an access port for the screw in front of the trigger so that the trigger pull can be adjusted.
What others should know: Now that I have figured out how to adjust the trigger, this is a little tack driver. To adjust the trigger. There're 2 screws. 1 in front of the trigger and 1 behind the trigger. The screw in the front is for the, wait for it, the 10 mile road march in the mud trigger pull. Some people call it military slack. Definitely messes with you accuracy. Now this front trigger has no access so you have to drill a hole in the trigger guard in order to get to the screw. Now this will probably void your warranty, you can thank me later. Once you have access to the front screw, start tightening it, that's clock wise, tighten the screw a little at a time until the gun will no longer cock. Then back it out about half a turn or until it cocks. You will be impressed with the new found accuracy. Backing out the rear trigger reduces the poundage of your trigger or the amount of pressure you apply to the trigger with your finger to make it go bang. Shooting cans now at 80 yards.
Things I liked: Looks very cool with build quality to match. I added a very high end scope and can hit a dime every time at my intended target of 30 feet. Goodbye pigeons...
Things I would have changed: Nothing at this price
What others should know: Its not quiet but its powerful and the tripod is a great addition
Things I liked: so freaking powerful! great accuracy and looks so cool. i have another pellet gun that bounced off mini kegs and did not puncture it....this gun shot clean through both sides and stuck in the tree behind it, and the holes were huge in the mini keg.
Things I would have changed: scope. junk scope honestly. i replaced mine with a 6-24X50 scope with a sunshield
What others should know: this is heavy for a pellet gun. there are a few pinch points, bipods, and when u break the barrel. be careful
Create an online review and share your thoughts with other customers. Show Other Reviews
Is this gun made by Norica
Made in China like most things? Distributed by Bear River.
I want to get this gun in .22 but am not a big fan of the fiber optic sights are the removable?
Comes with a scope ( can be removed ) ? Yes sights can also be removed.
Hi there guys....quick question...can the fake suppressor be removed? Thanks.
No! I asked them directly, it's glued on and will void the warranty.
|Max Velocity||1000 fps|