2019 SHOT Show: Part 4

by Tom Gaylord
Writing as B.B. Pelletier

Part 1
Part 2
Part 3

This report covers:

  • Synergis
  • Gamo USA
  • The story
  • It gets better
  • AirForce Airguns
  • Diana Mauser K98 PCP
  • Summary

Synergis

We were in the Umarex booth in the last report, so we’ll start there. The one other airgun that caught my eye in that booth was the new Synergis underlever repeater. Yes, this is yet another spring-piston rifle that repeats!

Umarex Synergis
The Synergis from Umarex looks exciting. Photo courtesy Umarex USA.

This rifle has a gas piston/spring, yet is quite easy to cock. I am guessing it’s between 25 and 30 pounds of effort. It gets 1,000 f.p.s. with .177-caliber lead pellets and 1.200 with alloy pellets. It has a 12-shot rotary magazine, so it’s another spring-piston repeater. But this one has an underlever, so the mag is lower than usual with a springer that repeats. It has a shrouded barrel for quiet shooting and comes bundled with a 3-9X32 scope and rings. But wait for it — the really big news is the price. The Synergis retails for $169.95! When Umarex marketing manager Justin Biddle told me that I said, “What?” I expected $100 more. read more


2019 SHOT Show: Part 1

by Tom Gaylord
Writing as B.B. Pelletier

This report covers:

  • Media Day — Velocity Outdoors and Sig
  • American Airgunner
  • New compressor
  • Fortitude Gen II
  • Crosman barrels?
  • Crosman Night Stalker
  • Benjamin Mag Fire
  • Sig Day at the Range
  • MPX PCP
  • ASP Super Target
  • P365
  • Summary

Media Day — Velocity Outdoors and Sig

I usually attend Media Day the day before the SHOT Show opens, but last year there were no airgun manufacturers there. So this year I decided not to go to Media Day, but to go to Sig Day at the Range instead. It’s held on the same day. That left me with some time on Sunday, the day before. And Velocity Outdoors, the corporation that owns Crosman and all of its various holdings, hosted a media presentation of its products at Machine Gun Vegas — an indoor gun range where you can shoot fully automatic weapons. On this evening the place was all ours.

American Airgunner

When I arrived I saw nobody I recognized, for Velocity Outdoors has many other companies beside just Crosman. But then Rossi Morreale of American Airgunner came in with his film crew and we did an impromptu show segment while looking at the new offerings from Crosman and Benjamin. read more


Tuning Michael’s Winchester 427: Part 6

by Tom Gaylord
Writing as B.B. Pelletier

Diana 27
Michael’s Winchester 427 is a Diana model 27 by another name. The rifle pictured is my Hy Score 807/Diana 27.

Part 1
Part 2
Part 3
Part 4
Part 5

A history of airguns

This report covers:

  • Assembling the ball bearing cages
  • Two cages — inner and outer
  • The real sear
  • Trigger assembly
  • Finish the assembly
  • Trigger adjustment
  • Test the rifle
  • Summary

And I’m going to pick it up right where we left off on Friday. A reminder that I am in Las Vegas at the SHOT Show today and will not be able to respond to comments as easily as normal. Let’s get started.

Assembling the ball bearing cages

We have come to the most daunting part of the assembly — assembling the trigger unit. You have to put a swarm of loose parts into the spring tube under tension from both the mainspring and the trigger spring. First, put the lubricated spring guide into the rear of the mainspring. I forgot to do that the first time through and I assembled the rifle without the guide. Got the rifle all buttoned up and said those famous last words, “I hope I never have to do THAT again!” Then my eyes fell on the guide sitting on the table. It was smiling at me, and I’m pretty sure I heard God laugh a little! read more


Tuning Michael’s Winchester 427: Part 5

by Tom Gaylord
Writing as B.B. Pelletier

Diana 27
Michael’s Winchester 427 is a Diana model 27 by another name. The rifle pictured is my Hy Score 807/Diana 27

Part 1
Part 2
Part 3
Part 4

A history of airguns

This report covers:

  • SHOT Show
  • Today and Monday
  • New parts
  • Scragging?
  • Lubricating the mainspring
  • Rust removal
  • Lubrication
  • Putting the piston into the spring tube
  • Pull the trigger!
  • Attach the barrel
  • Break

Many of you have been reading this series in which I tune reader Michael’s Winchester 427 that is actually a Diana 27. This is not an air rifle for beginners to learn on! The mechanism is too complex for first-timers for a number of reasons that should become clear today.

SHOT Show

I have to tell you — this is a very lengthy report. I won’t get it all done today, so Monday I will finish up. And on Monday I will be in Las Vegas at the SHOT Show. I won’t see your comments as frequently as usual while I’m there next week, plus after I walk out of the show every day I have to go back to my room, write the next day’s blog and have it ready to publish by 9 p.m. which is midnight on the east coast where the WordPress server publishes the blog. So please don’t ask me any lengthy questions. I am not going to have dinner with anyone this year, so I can do my work without being whipsawed! read more


The Beeman P1 air pistol: Part 12

by Tom Gaylord
Writing as B.B. Pelletier

Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7
Part 8
Part 9
Part 10
Part 11

Beeman P1.
Beeman P1 pistol.

This report covers:

  • The test
  • Sight adjustments
  • Sig Match Ballistic Alloy
  • H&N Finale Match Light
  • Crosman Premier Light
  • What is happening?
  • Discussion 2
  • Summary

Today we will look at the accuracy of the Beeman P1 pistol on high power with the UTG RDM20 Reflex Micro Dot sight that Pyramyd Air doesn’t currently stock. This sight is quite small and light and I thought it would be ideal for the P1, which we proved in Part 11, when the pistol was shot on low power. Today’s test on high power will test both the accuracy of the pistol as well as this sight’s ability to remain in one place. Dot sights that are larger have to be butted against the front sight to stay in place, but so far this one doesn’t have to be. read more


Treasure of the pond

by Tom Gaylord

A history of airguns

This is a special day. You will notice that I did not use my pen name today.

I’m showing you the first chapter in my next book. My last book was BB Guns Remembered, which is a collection of short stories I wrote about vintage pictures of boys with BB guns. I make nearly $100 a year from the online sales of that book, which beats the thousands I lost on the R1 book. So, I obviously don’t do this for money. I do it for fun. Have some fun on me this weekend!

boy dog gun

My gosh! I never looked that clean a day in my life! I had to take a bath and get on my best summer clothes for that picture. See those shoes? Never wore them in the summer, except to church. And the hat? Not on your life! It made me look like a girl. read more


DIY Rifle Stock – Part 3

by Tom Gaylord
Writing as B.B. Pelletier
Today’s report is Part 3 of reader Vana’s excellent report on stock making.

If you’d like to write a guest post for this blog, please email me.

And now, over to you, Hank.

Part 1
Part 2

Slavia 618
This is my original 55 year old Slavia 618 in its new “firewood” stock. I made this one in a “camo” style, using cherry and maple blocks in a random arrangement of the pieces.

This report covers:

  • Parts of the hand
  • The model
  • Getting ready
  • About the grip
  • Carving the grip
  • The Try-Gun stock
  • Summary

Parts of the hand

parts of the hand
Legend: These are parts of the hand that I will reference in my discussion of the grip.

I made this legend so that it will be easier to follow my explanations. In the picture, my grip is relaxed and open so I can label the parts clearly. When actually holding the grip, my thumb (1st Digit) would wrap around the grip causing the Thenar region to move down to follow the top of the Palmar region perimeter (purple line), and the 3rd, 4th and 5th fingers would be curled in more. read more