Date: 21/10/2020 17:49
0
Airgun Hunting is Legal! Check to see what is allowed in your state ⭢ Check It Out!

UTG Deluxe Tactical Red Laser Sight, Weaver/Picatinny Mount, Remote Pressure Switch

4.530 reviews
UTG Deluxe Tactical

Roll over image to zoom in

See customer imageShare your images

1-year limited warranty

PY-A-2719

$27.97

List Price $31.97 Save $4.00 (12%)

Pre-order

Out of Stock

Estimated in-stock date 11-16-20
Place your order now for delivery priority!

Click to get email when it's in stock!

Estimate Shipping

Add to Compare
Add to Wish list

This product is out of stock.
Estimated in-stock date 11-16-2020.
Place your order now for delivery priority!

  • UTG red laser
  • Push-button on/off switch and remote pressure switch
  • Windage and elevation adjustments
  • Class 3R laser
  • 2.5-3.1mW output
  • 630-640nm wavelength
  • 15-20mm beam dia. @ 15 meters
  • 14 deg. F to 113 deg. F operating temperature
  • 80 mins. of battery operating time
  • 500 meters laser range
  • 6000 hrs laser lifetime
  • .8 oz. w/batteries
  • 2.4 oz. w/batteries, tail cap assembly
  • .55" dia. body
  • 2.64" long
  • Incl. Weaver/Picatinny mount, button batteries, screwdriver, hex wrench & pressure switch
Mount this red laser on any air pistol, firearm or airsoft gun for enhanced target acquisition. Get up to 6,000 hrs of life from this tactical red laser!



Item Code: LESCP-LS268 [PY-A-2719]
youTube video

other products by Leapers > UTG

Share

Average Customer Review

4.5 (30 reviews)

Create an online review and share your thoughts with other customers

5.0 5.0

5.0 5.0

By Terry from USA on 2020-07-13
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: The installation, engineering, quality, and performance of the laser sight exceeded my expectations. Typical UTG high quality. The provided instructions were good and the tips from the reviews were very helpful. The basic tool kit supplied was all that was needed for installation.

Things I would have changed: It would be nice if the screwdriver fit the screw slots tightly since the final windage and elevation adjustments are very touchy. However, if the screws didn't turn quite so easy they might not need blue Locktite but that is a small problem.

What others should know: The LR44 batteries are1.5 V alkaline and came fully charged at 1.57V. I bought a package of 20 LR44s online as backups, for about 40 cents apiece. I was lucky I could see through my iron sights to show where the pellet would go versus where the laser dot was aimed. The screws are very sensitive and needed a total of less than a quarter-turn of adjustment. The final adjustments were tweaking the screws a bare minimum and changing the point of impact about 3/8" at 10 yds. When I look through the iron sights now, I see the laser dot on top of the front blade. My pellet gun is low recoil and the screw adjustments didn't seem to be shifting, but I put some blue Locktite on the screw heads just in case. There was really no room on the front of the laser for allen head screws, and the small flat head screws worked fine. The mount that holds the laser is tightened to hold the laser with the middle allen screw. Only use the end screws to release from the rail so the zero doesn't shift.

 

1.0 1.0

1.0 1.0

By unrepentantsinner from USA on 2019-09-21
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Small and compact, resembles a common design.

Things I would have changed: Use Allen head screws instead of that worthless screw driver, it is extremely hard to zero. Get a different mount, and do some better quality control.

What others should know: I try to have lasers on all my air rifles and zeroed at 11 yards to zero scopes when I play musical scopes. I bought these off EBay, if I had purchased them from PA I would have returned two out of three. I own a UTG reflex sight and several scope rings and risers, they are good items, so buying three UTG Delux I had the same 2 Walmart (Beeman?) lasers for 9 years, threw one away when the on off switch failed recently. I decided on the UTG Deluxe laser as it remotely resembled my tried and true Walmart/Beeman laser. There is absolutely nothing Deluxe about this unit. I have owned three UTG Delux lasers, #one the adjustment screw was frozen right out 0f the box, #2 had threads on the battery end that were not finished, they needed a bevel, the laser quit working while trying to put the end cap on. The mount requires rezeroing after switching it to another gun as once those three Deluxe mount screws are loosened the laser can and will rotate in the mount.r Buy a higher quality

 

3.0 3.0

5.0 5.0

By Ricardo from USA on 2019-06-30
See all my reviews
Was this review helpful?
5.01 rating

Verified Purchase

Things I liked: Price and a longer battery time in comparison with other compact lasers.

Things I would have changed: Adjustment with Allen wrench and to be able to hold zero.

What others should know: I have 4 UTG LS268 lasers and all of them have Loctite blue. I really noticed the discrepancy on the Crosman Bushmaster MPW, which has a UTG 3-9x32 scope and two lasers (one is the subject in review). I installed a different second laser in order to check where the problem was. After I put Loctite on the UTG laser all of three were in agreement.

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • Marc from USA asked:

    Hi, Just wondering if this will be mountable on the front of my Sig Saur MCX air rifle gun with scope that it came with and not be in the way of my scope?

    • Mark from USA:

      You will have to get weaver rail sections to attach to the Q-loc style handguard to mount the laser on the side or bottom of the foregrip.

  • Edward from USA asked:

    Will this fit a walther cp99 or stig m17 if not what will. Thanks ed from ma

    • Mark from USA:

      It will fit the CP99 and the Sig M17.

  • Trevor from USA asked:

    Hi will utg deluxe red laser sight fit on a glock17 gen 4 .. . weaver

    • Mark from USA:

      Yes

See all discussions

This product is out of stock. Estimated in-stock date 11-16-2020

Navigation