Benjamin Trail Nitro Piston 2: Part 6

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1
Part 2
Part 3
Part 4
Part 5

This report covers:

• Rifle was set up
• The hold
• Accuracy
• A hunter’s rifle
• Comparison with the first rifle

Benjamin Trail Nitro Piston 2
Benjamin Trail Nitro Piston 2

This is accuracy day with the second Benjamin Trail Nitro Piston 2 rifle — the one Crosman sent especially for this test. We’ve already seen how this second rifle exceeds the power of the first one, so today we’ll see what impact that has on accuracy. As with the first rifle, I’ll shoot 14.3-grain Crosman Premier pellets exclusively in this test.

Rifle was set up
When I unboxed the scope, I found the rings already installed in the correct location, meaning I could install them directly on the rifle. That proves this rifle has been tested and set up before I received it. The scope went on quickly, and I found it was very close to being sighted-in; but the inability to focus the target as close as 25 yards was a hinderance to aiming. I estimate my groups were a quarter-inch larger than they needed to be because I couldn’t see well enough to put the crosshairs on an exact spot. The scope arrived set at 4X, which indicates the rifle was tested at 10 meters or yards before it was sent. At 25 yards, I wanted to see the bull more clearly, so I adjusted it to 9X. But as I said, the focus was off because the scope is parallax-adjusted for a longer distance. read more


Benjamin Trail Nitro Piston 2: Part 5

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1
Part 2
Part 3
Part 4

This report covers:

• Here we go, again
• Out of the box
• Cocking
• Barrel bushings
• Scope base welds
• Pillar bedding!
• Good to go
• Crosman Premiers
• Beeman Kodiaks
• Crosman SSP
• Trigger
• Evaluation thus far
• Reminder from PyramydAir.com

Benjamin Trail Nitro Piston 2
Benjamin Trail Nitro Piston 2

Here we go, again
Today, I’m starting our look at the second Benjamin Trail Nitro Piston 2. This rifle was sent from Crosman to Pyramyd Air especially for me to test, so we know that it’s the absolute best that they can do with the NP2 design. I’m not being sarcastic when I say that. I’m telling all the Crosman ankle-biters that I do acknowledge that this rifle has been thoroughly examined by Crosman before sending it to me — just to stop them from saying it. This is the same thing I recently did with the Daisy 880. read more


Benjamin Trail Nitro Piston 2: Part 4

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1
Part 2
Part 3

This report covers:

• Accuracy day…part 2
• Things that were done
• Sight-in
• Ten meters
• The hold
• 25 yards
• Velocity with Premiers
• Overall evaluation

Benjamin Trail Nitro Piston 2
Benjamin Trail Nitro Piston 2

Accuracy day…part 2
Today, we return to the Benjamin Trail Nitro Piston 2 air rifle. I think I’ve solved all the mysteries and finally got the rifle to shoot the way it should. You be the judge.

Things that were done
Several things were done to make the rifle ready for today’s test. First, I cleaned the barrel with J-B Non-Embedding Bore Cleaning Compound on a bronze bore brush. To do that, I removed the barrel shroud and the baffles, so access to the barrel was easy. I cleaned from the breech. Since the NP2 has a gas spring, I could leave it cocked as long as I wanted without hurting the spring. read more


Benjamin Trail Nitro Piston 2: Part 3

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1
Part 2

This report covers:

• Lots of interest
• Mounted the scope
• The scope
• Initial accuracy
• Examine the baffles
• Back to Premiers
• Conventional artillery hold not right
• Found the secret
• Cocking effort
• Trigger
• Firing behavior
• Summary

Benjamin Trail Nitro Piston 2
Benjamin Trail Nitro Piston 2

Today is like one of those pregnant pauses in a movie. You know what you want the hero (that’s either me or the Benjamin Trail Nitro Piston 2) to say, but he just won’t say it. The poorer the actor, the longer you wait. Not today.

The Benjamin Trail Nitro Piston 2 works!

Oh, there’s a lot to tell, and I’m far from finished with my evaluation, but that’s how the story will end. I want to tell you about the rough and rocky road it took to get to that point — and we aren’t quite there yet. read more


Crosman Outdsoorsman 2250XE: Part 1

by B.B. Pelletier

Today, we’ll start a look at an unusual airgun from Crosman. It’s getting to be summer around the country, and the summer guns are CO2 guns, so today’s choice of the Crosman Outdsoorsman 2250XE is just in time. This .22 caliber CO2 carbine wouldn’t exist if Crosman hadn’t reinvented itself at the beginning of the 21st century.

Dennis Quackenbush and I sat on both sides of Crosman’s former president and CEO during the Airgun Breakfast at the NRA Annual Meetings in Kansas City, back in May 2001. We were all chatting about the airgun business, and I happened to mention that Dennis made a good living making and selling upgrades and accessories to what was at that time a $39 Crosman CO2 pistol. The executive was surprised, thinking that no one would want to spend money on such a cheap airgun, but Dennis floored him when he said, “You sell them the gun for $39 and then I sell them $125 worth of accessories for it.” From his facial expression, I don’t think he really believed me. read more