888-262-4867 (GUNS)Deals888-262-4867 (GUNS)Deals1-year limited warranty
Earn 58 Bullseye Bucks
PY-A-4636
$57.95
List Price $59.95 Save $2.00 (3%)
Only 3 left in stock
When you take your carbon fiber tank to be filled, you'll need a connector (adapter) to attach to the DIN valve on your tank that will fit the compressor at the place that fills your tank. This adapter should be a perfect match, but it's a good idea to contact your fill station in advance to make sure this adapter is the one you need to attach to their fill system.
Limited Quantities
other products by Crosman
Unit Converter for Airgun Measurements
Create an online review and share your thoughts with other customers
5.0 5.0
3.0 3.0
Things I liked: works great with pistol air tanks
Things I would have changed: should have better protective sleeves on unit
5.0 5.0
5.0 5.0
Things I liked: Works great
Things I would have changed: Would be nice if it was shorter be still good
Create an online review and share your thoughts with other customers. Show Other Reviews
Got a question? Got an answer?
Log in, then enter your text.
This this fitting let me thread into my Air Venturi Mini Wingman 100 cu in tank to fill it?
Yes.
Does this fit the filling side of Benjamin pump?
Yes it is a 1/8 npt fill nipple so it will fit to the quick disconnect at the end of your Benjamin hand pump
I have my scuba tank filled at the local fire department and had a special adapter made to do this. Does anyone know if the male end of the adapter is the same size/thread as the threaded end of the SCBA tanks that the fire departments use/fill? I'd like to pick up a Carbon fiber tank for my PCP but am wondering what it would take to get filled so I can also get it filled at my local fire dept.? Tx
No I believe the male end is closer to the size of a ninja regulator
5.0 5.0
5.0 5.0
See all my reviews
Verified Purchase
Things I liked: I needed this to fill my BenJi Carbon fiber tank. I had only one problem. When fiiling the tank the adapter was leaking a little and tightening it didn't do anything. So I let it leak a little and filled my tank to 4500PSI with a extra 4 mins time. Once the tank was full I pulled it apart with two wrenches. Now they make 3 teflon thread tape. One is white and one is dark gray. The difference is the dark gray is thicker and use on this adapter. Which one or two wraps is fine. Using the white teflon tape maybe 3-4 wraps. The third I don't talk about is used for LP Gas. So White is .97 cents and dark gray 2.00$ home depot. My adapter was 100% as pictured. As for the leak it wasn't a big deal to bring to anyone's attention.
Things I would have changed: I would test if leaks before shipping. Very simple, As some people could be clueless what to do. All in all worth the money and works as it say's. I may just change the foster valve with a one way foster valve. This valve just a standard. This way the foster valve you just wouldn't have to close the tank and just let the pressure release from the tanks bleed valve or the compressor. But all in all once you remove the adapter you better close the tanks valve first
What others should know: But this is for your Benji tank and you own your compressor it's great. Scuba shops your lucky up to 3600-3800PSI on a good day and when tank cools your pressure drop 200PSI...And where i'm at paint ball shops open only Saturday and Sunday. And they charge for each 1000PSI.