1-year limited warranty
List Price $219.95
Bundle & Save $20.00!
SIG Sauer MCX Pellet Rifle, Black
.177 caliber velocities Our tech department provided this shot string, which was done with 5.25 grain match ballistic alloy pellets:
Shot 1: 428.11 fps Shot 2: 513.51 fps Shot 3: 493.59 fps Shot 4: 489.98 fps Shot 5: 499.75 fps Shot 6: 492.83 fps Shot 7: 497.49 fps Shot 8: 497.08 fps Shot 9: 474.27 fps High: 513.51 Low: 428.11 Average: 487.40 fps
|Max Velocity||700 fps|
|Front Sight||Flip-up, adjustable|
|Rear Sight||Flip-up, adjustable|
Create an online review and share your thoughts with other customers
Things I liked: 30 round belt, which is the main reason why I finally convinced myself to pay so much for a CO2-powered zinc diecast gun. And there's an HPA adapter so I can go regulated & avoid the temperamental character of CO2. Storage inside the grip for the loading tool, even though it seems to be missing a foam insert to keep that tool from rattling around. 3" groups @ 50 yards on a rest, using FTT Green pellets, dot sight & tuned trigger
Things I would have changed: Trigger could be wider, to deal with that stiff pull. Fore-grip could be more ergonomic - rear of the grip has sharp corners that will dig into your hand. The sear holding the hammer needs to be shaped so that it does not drive the hammer back into the mainspring just before firing - this & polishing will greatly reduce the trigger pull. Bit more grease inside - there's a few places that didn't get grease and improved the action feel after I added some. Shorten the barrel an inch to have one single baffle inside the can, or have a version that simply uses the MPX barrel with full baffles? And the battle sights are really just that, not very good for precise target shooting. The sight picture is too blurry. I put on a TRS-20 dot sight & groups instantly shrunk
What others should know: You can not have the CO2 or HPA still attached & pressurized when taking the gun apart, the body halves are also holding the tank block together. The bottle threads are in a separate collar piece that is not directly attached to the inlet body where the bottle seal is - so taking the gun apart will automatically dump your bottle, as I found doing it the 'fun way'! Re-shaping the sear so the contact surface where the hammer rests is curved to follow the sears axis is the number one thing to do in order to fix the really bad trigger pull. The sear & hammer are made of really soft pot metal, so I wouldn't expect these parts to last long without changing their geometries. I only had about 15 belts through the gun when I tore it apart & found that the hammer was already wearing down where it contacts the sear. If it wasn't for how the outside of the MCX/MPX simulate real iron, then this is a very over-priced toy that won't last. If you try hard enough, the suppressor does unscrew
Things I liked: As far as looks go, this thing is the real deal. Ive only had one opportunity to test it out, and it performed perfectly. I need more time to test it out in other situations, but otherwise itsawsome. Its so good that I ordered the Sig MPX. Thank you Sig Sauer, and thank you Pyramyd Air as well. Very satisfied.
Things I would have changed: As of right now, nothing at all.
What others should know: Yes, make sure to use only pellets that fit the rotary belt- longer pellets, like Crosman Gold Flight Penetrators will be too long and jam the gun.
Things I liked: I liked the realism and quality of sig sauer products. The unit has a fair amount of power and the co2 is easy to install with no wasted gas. The open sites are nice!!! But i was never able to tune them in were i wanted could be just me! But i purchased a scope and all is great! I also tried the conversion kit to convert to a precharged and that didnt work eitther, it made the rifle too long for my short arms.
Things I would have changed: Would love to see a nitrogen capsule or something stable so that it can be taken out in the cold
What others should know: Sig sauer is resl good
Create an online review and share your thoughts with other customers. Show Other Reviews
Will lighter grain(4,5gr) pellets increase velocity?
Can this be converted to full auto?
Does sig carry replacement rear syock for the mcx / mpx ?
All parts will come thru Sig Sauer.
Empty the Roto Belt mag as fast as you can pull the trigger! 30rd Roto Belt mag, semiauto.
|Max Velocity||700 fps|
Out of Stock