UTG Deluxe Tactical Red Laser Sight, Weaver/Picatinny Mount, Remote Pressure Switch

The installation, engineering, quality, and performance of the laser sight exceeded my expectations. Typical UTG high quality. The provided instructions were good and the tips from the reviews were very helpful. The basic tool kit supplied was all that was needed for installation.

It would be nice if the screwdriver fit the screw slots tightly since the final windage and elevation adjustments are very touchy. However, if the screws didn't turn quite so easy they might not need blue Locktite but that is a small problem.

The LR44 batteries are1.5 V alkaline and came fully charged at 1.57V. I bought a package of 20 LR44s online as backups, for about 40 cents apiece. I was lucky I could see through my iron sights to show where the pellet would go versus where the laser dot was aimed. The screws are very sensitive and needed a total of less than a quarter-turn of adjustment. The final adjustments were tweaking the screws a bare minimum and changing the point of impact about 3/8" at 10 yds. When I look through the iron sights now, I see the laser dot on top of the front blade. My pellet gun is low recoil and the screw adjustments didn't seem to be shifting, but I put some blue Locktite on the screw heads just in case. There was really no room on the front of the laser for allen head screws, and the small flat head screws worked fine. The mount that holds the laser is tightened to hold the laser with the middle allen screw. Only use the end screws to release from the rail so the zero doesn't shift.

Small and compact, resembles a common design.

Use Allen head screws instead of that worthless screw driver, it is extremely hard to zero. Get a different mount, and do some better quality control.

I try to have lasers on all my air rifles and zeroed at 11 yards to zero scopes when I play musical scopes. I bought these off EBay, if I had purchased them from PA I would have returned two out of three. I own a UTG reflex sight and several scope rings and risers, they are good items, so buying three UTG Delux I had the same 2 Walmart (Beeman?) lasers for 9 years, threw one away when the on off switch failed recently. I decided on the UTG Deluxe laser as it remotely resembled my tried and true Walmart/Beeman laser. There is absolutely nothing Deluxe about this unit. I have owned three UTG Delux lasers, #one the adjustment screw was frozen right out 0f the box, #2 had threads on the battery end that were not finished, they needed a bevel, the laser quit working while trying to put the end cap on. The mount requires rezeroing after switching it to another gun as once those three Deluxe mount screws are loosened the laser can and will rotate in the mount.r Buy a higher quality

Price and a longer battery time in comparison with other compact lasers.

Adjustment with Allen wrench and to be able to hold zero.

I have 4 UTG LS268 lasers and all of them have Loctite blue. I really noticed the discrepancy on the Crosman Bushmaster MPW, which has a UTG 3-9x32 scope and two lasers (one is the subject in review). I installed a different second laser in order to check where the problem was. After I put Loctite on the UTG laser all of three were in agreement.