888-262-4867 (GUNS)Deals888-262-4867 (GUNS)Deals
Walnut stock
Morgan (L.) and Kristen Smith are Louisiana 4-H Shooting Sports Teen Ambassadors, and they promote shooting statewide (Kristen is also a National 4-H Shooting Sports Teen Ambassador). They're holding an Air Arms TX200 Hunter Carbine, but they also used the Air Arms S200 Target air rifle for some matches.
Roll over image to zoom in
Caliber: .177" (4.5mm), Stock: Beech, Handle: Right,
Air Arms TX200 HC .177-cal Air Rifle - Beech Stock, Right-Handed
Lifetime limited warranty
Earn 600 Bullseye Bucks
PY-175-518
$599.99
List Price $669.99 Save $70.00 (10%)
Bundle & Save $43.00!
Out of Stock
This item is past due. Check back for updates.
Place your order now for delivery priority!
Click to get email when it's in stock!
Excluded from coupons
This item is not eligible for coupon discounts
Questions?
Contact Customer Service:
Call: 888-262-4867
WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Air Arms TX200 HC (Hunter Carbine) Spring Piston Air Rifle
The Air Arms Hunter Carbine is a short version of the renowned TX200. The HC shares the standard TX200 Mk III internals. Externally, it looks the same as previous models but is a shorter, carbine version which, according to Air Arms, was a popular customer request.
"When customers asked for a shorter, carbine version of the TX 200, we gave them what they wanted," the manufacturer writes on its website. "The result was the TX200 HC - Hunter Carbine, which rapidly became a best seller."
Some highlights of this shorter-model TX200 include a Lothar Walther barrel, built-in moderator, adjustable two-stage trigger, handsome Minelli stock available in right- and left-hand variations, a Monte Carlo cheek piece and a ventilated, rubber butt pad. Because this is a carbine, the cocking lever is shorter, increasing the cocking effort.
Although it's shorter in length than the TX200, the HC is anything but short on performance. "Everything that makes the TX200 the best in its class is contained in the carbine-length HC, including those 'factory tuned' internal components, the elegant stock design and, of course, that impeccable metalwork," Air Arms writes. "It's all there, ready to produce the performance that took the TX200 to World Championship level."
If you're the kind of serious airgunner who demands the highest performance, unwavering consistency, reliability and pinpoint accuracy for which Air Arms is internationally known, the TX200 HC - Hunter Carbine might be the ideal springer air rifle for you.
| Caliber | .177" (4.5mm) |
| Max Velocity | 930 fps |
| Loudness | 3-Medium |
| Barrel Length | 13.0" |
| Overall Length | 39.25" |
| Shot Capacity | 1 |
| Cocking Effort | 34 lbs |
| Barrel | Rifled |
| Front Sight | none |
| Rear Sight | none |
| Scopeable | 11mm dovetail |
| Trigger | Two-stage adjustable |
| Buttplate | Ventilated rubber |
| Suggested for | Small game hunting/target practice |
| Action | Underlever |
| Safety | Automatic |
| Powerplant | Spring-piston |
| Function | Single-shot |
| Body Type | Rifle |
| Fixed/adj. power | Fixed |
| Weight | 8.5 lbs |
Create an online review and share your thoughts with other customers
5.0 5.0
5.0 5.0
5.0 5.0
Verified Purchase
Things I liked: Prior to purchasing the TX200HC .22 I owned (still do) the full length TX200 MKIII in .177. I have enjoyed shooting this gun. Within the past year or so I have transitioned to shooting mostly in the off-hand mode and not from the bench. However, that can get tiring over time and after about 15 shots I wish both me and the gun were ambidextrous. I decided to look into the HC model as being more off-hand friendly. After much dithering I decided on the .22 version in Walnut right hand. I find the gun to be much better balanced for off-hand shooting. My version measures 38 inches long and weighs in at 8.4lbs without scope and mounts. This compact size and relative light weight is one of the guns greatest assets. To maintain the light weight I installed a Burris Timberline Scope (4.5-14x32). This scope has crystal clear glass, it is compact and light, springer rated and with a usable high magnification. It has one deficit - a longer than normal eye relief. The firing cycle is less stressed
Things I would have changed: The rattling cocking lever and gap between the stock and load port could be rectified.
What others should know: The firing cycle is less stressed than the .177 MkIII more of a thump with a gentler shove to the shoulder than the sharp snap’ I have been used to. The noise is not objectionable either – being a .22 it is subjectively quieter than the .177 HC. I use a BKL one piece drooper mount (260D). By the way this is one of the new Lothar Walther barrel guns with the blued gun barrel to prevent transportation corrosion. I have not done a thorough pellet test as yet. The gun likes the JSB 18.13 gr pellets and is ok with the Air Arms 16 grains. However, it does really well with the Predator lead free 11.75 grains. I have not tested the gun out to 50 yards. But at approx. 32 yards the predators are spectacular with minimal drop. The one drawback is the high cost of these pellets. No velocity results as I am sans chrony right now, but the Predators seem much faster than the lead options. All told this is a wonderful package light enough for my intended task of off-hand plinking.. I imagine this gun
2.0 2.0
3.0 3.0
4.0 4.0
Verified Purchase
Things I liked: Accuracy, stock, size
Things I would have changed: The blueing lately on Air Arms TX200 is not what it used to be. I have had to return a few due to cloudy areas/spots. Quality control is lacking on the blueing line in the factory. Maybe they are trying to build too fast to keep up with demand. Their blueing was one of their claims to fame.
Create an online review and share your thoughts with other customers. Show Other Reviews
Got a question? Got an answer?
Log in, then enter your text.
Where is this manufactured?
Air Arms are made in the UK.
What is the diameter of the barrel? Like the outer tube. Thanks.
The shroud OD is 0.740 "
Has anybody tried mounting open sights on this rifle?
It would require a custom front sight and drilling /tapping the shroud.
Air Arms TX200 HC .177-cal Air Rifle - Beech Stock, Right-Handed
| Caliber | .177" (4.5mm) |
| Max Velocity | 930 fps |
| Stock | Beech |
| Grip | Right |
| Color | Brown |
This item is not eligible for coupon discounts
Only 2 left in stock
This item is past due. Check back for updates.
Out of Stock
This item is past due. Check back for updates.
Place your order now for delivery priority!
5.0 5.0
5.0 5.0
5.0 5.0
See all my reviews
Verified Purchase
Things I liked: .22 Cal. RH Beech. Where to start?!! Although the polished steel doesn't appear to be real bluing, it is absolutely stunning and beautiful, as is the fit, finish, laser cut art and smoothness of the stock. The ambidextriousness of the stock is extremely comfortable. The dovetails are indeed shallow, but sufficient for a very solid scope mount. I really like that the dovetails are cut all the way back off the receiver tube, allowing me to have comfortable eye-relief of the Hammers 3X9X32 AO scope, with the mount's stop pin engaged, and about 3/4" of the 4 screw mount hanging off the rear of the dovetails, acting as a pinch-clamp against the stop-pin. Accuracy is dime to sub-dime groups @ 38 yards if I do my part. My favorite pellet for most of my rifles, and ABSOLUTELY this one, is H&N Sport Baracuda Match 21.14g, 5.51", a bit heavy, BUT, sighted in @ 20 yrds, 2nd MIL DOT is dead on, blasting through 1/4" pine board. EVEN THE TRIGGER IS AMBI! VERY SOLIDLY BUILT. Recommend highly.
Things I would have changed: The cast trigger guard has machining on one side and slight pits from the casting process on the other. As with most everyone else, a safety that re-engages @ the switch. As AWESOME a choice of construction material that AA used throughout, a PLASTIC muzzle cap instead of at least aluminum!!??!!
What others should know: Keep and eye out for open-box/refurb deals. With only a few VERY slight metal and wood blemishes, VERY happy with the $90 discount. There is some slight buggering of the steel around the where the safety engages at the trigger block- safety still functions fine and the "buggering" isn't visible , but that's the only "refurb" sign I can see.