Roll over image to zoom in
1-year limited warranty
2X Earn 52 Bullseye Bucks
List Price $29.99 Save $4.00 (13%)
other products by Air Venturi
and share your thoughts with other customers
Things I liked: I liked the ridged exterior...helps get a grip on the end of the barrel when you're cocking it (break barrel spring piston gun). I had my doubts about how well it would be secured by just one set screw, but it worked. Note that it was a little too large for my FWB 124, so I made up a shim from an aluminum soft drink can (I reasoned that it was softer than either the aluminum muzzlebrake OR the steel barrel) and made sure it was under the set screw do it didn't mark the barrel. Everything's good!
Things I would have changed: I still like the idea of having two set screws.
Things I liked: It makes knocking open the barrel easier (you don't hit the front sight with your hand) I put this on my Beeman R9.
Things I would have changed: The shiny finish doesn't match the bluing on the R9 barrel.They didn't break the corners on the ridges so they are kind of sharp feeling.
What others should know: The brake shim is too large for the R9 so i had to use electrical tape to take up the slack. Several different size plastic shims would have been nice to make a finished look.
Things I liked: It fits, great look to the rifle
Things I would have changed: Its made from milled aluminum, fits over my RWS 350 magnum with a little bit of play. I tried the spacer. With the spacer added to the barrel, the muzzlebrake was too small. The set screw tightened it all up but there is a 1/32 gap between the brake & the barrel. It works fine, just stating the facts
What others should know: It does look good, I put one on my RWS 350 in .177 & my .22 both fit exactly the same without the sleeve.
Show Other Reviews and share your thoughts with other customers
Does anyone know if this will fit the Beeman QB Chief? Or can recommend one that will fit?
Measure the outside diameter of your barrel, if it is between .590&.655 it should fit.
will this fit on the BSA scorpion 1200 SE ?
No enter your search on the internet , they are available ? It takes a 1/2 x 20 unf threads.
Will this fit the Hatsan 135 QE .25? If not is there another that will? Also, has anyone removed the front sight on that gun without any problems? Thanks in advance! \m/