Roll over image to zoom in
1-year limited warranty
List Price $79.95 Save $25.00 (31%)
other products by Air VenturiShare
Create an online review and share your thoughts with other customers
Things I liked: Solid well built and it works flourlessly.
Things I would have changed: Gauge could be little larger, sometimes its difficult to read. Perhaps digital.
What others should know: I feel its the best least expensive and fastest way to charge your rifle.
Things I liked: Good and Solid US-made Works Great!
Things I would have changed: Use standard 1/8" BSPP threads on the QD!
What others should know: This yoke works quite well for its intended purpose, fits and fills my Air Force TalonSS just great, the gauge is way off by comparison to my Talon's, and considering that the Talon was reading 3000PSI when the freshly-filled tank stopped flowing, and the yoke read 2600... It DOES fill just fine, though, with no leaks at all. Using it without a hose is a bit tricky, you have to lock the gun rigidly to the tank, but it does work. Which brings me to my only real gripe with it. This does NOT use standard 1/8" BSPP threads to attach the female QD. I suspect it might be ANSI, but be aware that the Air Venturi hose will NOT fit this! The male threads on the hose will fit the yoke loosely, but the male threads on the QD here don't even come close to fitting the female hose end. That being said, again, this WILL fill your gun just fine, and is about the most inexpensive and robust piece of hardware around for the job!
Things I liked: First of all it is well built. It is smooth no sharp edges. Works as intended the guage is very accurate. No leaks at all. I did add a hose to it with the existing foster fitting for some flexibility.
Things I would have changed: Nothing at all. It's worth the money.
What others should know: The knob that clamps it to the bottle came loose, A little red thread locker solved that problem.
Create an online review and share your thoughts with other customers. Show Other Reviews
Does the gage have standard 1/8 inch npt thread so a larger gage dial can be installed such as the AirVenturi 0-6000psi gage ???