Date: 23/2/2019 19:17
0

UTG 11mm (3/8") Dovetail to Weaver Adapter, 2pcs

4.5106 reviews
UTG 11mm (3/8").

Roll over image to zoom in

See customer imageShare your images

Lifetime limited warranty

PY-A-4148

$9.27

List Price $12.00 Save $2.73 (22%)

Add to Cart

In-stock

Estimate Shipping

Add to Compare
Add to Wish list

  • Description
  • Customer reviews
  • Q & A: 6 answered questions
  • 11mm  (3/8") Dovetail to Weaver Adapter
  • Insert into Weaver or Picatinny rings so they'll fit the smaller 3/8" or 11mm rails and dovetails often found on airguns and rimfire guns
  • 1" long
  • .93" wide
  • .24" high
  • .18 oz
  • 2 pieces

  • If your air gun or rimfire gun has a scope dovetail that measures either 11mm or 3/8" (approx. 9.5mm), you can use this lightweight aluminum adapter to attach your Weaver and Picatinny rings or mount to your smaller 11mm and 3/8" dovetails.

    This clever device clips into the base of your Weaver or Picatinny mount (both 1-pc mounts and 2-pc mounts), thereby reducing the size of the clamping jaws on the mount! A very easy way to make your mounts more useful for a wider range of guns. In fact, you can leave your optics in the mounts and move them from gun to gun! You'll still have to resight the gun after attaching the scope, but you won't have to reset or retighten the scope in the mount.



In stock


Item Code: MNT-DT2PW01 [PY-A-4148]

other products by Leapers > UTG

Average Customer Review

4.5 (106 reviews)

Create an online review and share your thoughts with other customers

5.0 5.0

5.0 5.0

By Richard C from USA on 2019-02-22
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Works great on mounting a UTG Reflex Micro Dot, 4 MOA Single Dot sight to a Beeman P1 air pistol, just like B.B. Pelletier described in his blog, Part 10, 11 & 12 for the Beeman P1 air pistol

Things I would have changed: Nothing ~ see my evaluation on the UTG Reflex Micro Dot, Red 4 MOA Single Dot sight.

What others should know: Ya, ~ be a consistent follower on P.A.'s blog!

 

5.0 5.0

4.0 4.0

By Todd from USA on 2019-01-28
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: They work well and are extremely low.

Things I would have changed: nothing

 

5.0 5.0

5.0 5.0

By Robert from USA on 2019-01-21
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Used the adapter to mount a 1X Leupold prismatic on an old Ithaca mod 72 saddlegun. Worked like a charm! Really liked that there is almost no height added to the original mount keeping everything nice and low. Simple, effective, it works.

Things I would have changed: NADA

What others should know: Should work great on PCP's and rimfires, I don't think I'd use it on a 300 Win. mag or a hard recoiling springer unless you had a positive stop to run it up against to keep it from walking on the rail.

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • SALARIAK from USA asked:

    Are they two pieces? for two rings or a single piece with 2 parts?

    • Tyler from USA:

      Two pieces. Could be made to work with two piece rings or a one piece picatinny mount though.

  • Kevin from USA asked:

    I see a set screw on top. What is that for? Is it the tightening of the scope rings that tightens this adapter on the rail?

    • Chevota from USA:

      I don't have these, no need, but I'd say from looking at the screw is to help keep them from sliding on the rail. I assume it's there because most Picatinny mounts aren't really made to grip well since the crossbar does all the work, so that screw would help somewhat. The poor reviews state what I suspected about their strength. I also suspect many of those were because the adaptor didn't have the adjustment to go far enough for those guns, if so then that little screw would be the only thing keeping the scope from sliding. Not sure why people didn't buy dovetail mounts, unless maybe they have a sight with an integrated mount like some red dots do. They do look cool and I'm sure there are people who are happy they exist, but be sure it'll work for you before you buy. For example I wouldn't put it on a springer unless I modified both of them and the springer. Or if your dove is rounded on top I can't see how they'd fit unless you milled flat spots for them.

  • Eaton from USA asked:

    do these work well? also would they work on the Kral Arms Puncher Pro PCP Air Rifle?

    • Stanley from USA:

      They do what they were designed for ? They make a 11mm into weaver / picatinny.

See all discussions

Compatible with UTG 11mm (3/8") Dovetail to Weaver Adapter, 2pcs

UTG 30mm Max.
UTG 30mm Max Strength Rings, Low, Weaver/Picatinn...
5.08 reviews
$18.98$15.95
Add to Cart

Only 5 left in stock

UTG 1 inch.
1" Quick-Detach Rings, Medium, Weaver/Picatinny,...
4.08 reviews
$27.99$20.97
Add to Cart

Only 1 left in stock

UTG Max Strength.
UTG Max Strength 30mm Rings, Medium,...
4.05 reviews
$22.97$17.97
Add to Cart

Only 5 left in stock

UTG 1 inch.
UTG 1" Max Strength Quick Lock Rings, High,...
4.55 reviews
$19.97$16.97
Add to Cart

Only 2 left in stock

UTG 30mm Quick-Detach.
30mm Quick-Detach Rings, Medium, Weaver/Picatinny...
5.02 reviews
$21.97$19.97
Add to Cart

Only 1 left in stock

Navigation