Home Blog  
Ammo El Gamo 68/68-XP – A futuristic airgun from the past: Part 4

El Gamo 68/68-XP – A futuristic airgun from the past: Part 4

by B.B. Pelletier

Part 1
Part 2
Part 3


El Gamo 68 is a futuristic breakbarrel from the past.

Today, I’ll take the El Gamo 68 to the next level of accuracy testing. I mounted a scope and went back to 25 yards to see what this gun can do.

Blog reader Mike sent me a trigger shoe he wasn’t using, and I installed it on the rifle’s thin blade. It made all the difference in the world. I don’t think I could have endured the 80+ shots that went into today’s test without it! Thanks, Mike!


The trigger shoe made the heavy pull pleasant.

Scope
I mentioned mounting a scope on the rifle before I checked it out. The 11mm scope dovetails are cut into the top of the spring tube and are very short by today’s standards. I was able to mount only a Leapers Bug Buster scope using 2-piece BKL mounts. The Bug Buster is a very compact scope, whose size compliments the 68 — and the eye relief worked out fine, so this was a happy coincidence.


A Leapers Bug Buster scope fit the small 68 very well.

The test
I used this test not only to see how accurate the 68 is at 25 yards, but also to see if there’s a difference between seating pellets flush and seating them deep with an Air Venturi Pellet Pen’s PellSet. Each pellet shot one 10-shot group seated each way. Let’s see how it went.

H&N Finale Match Pistol pellets
I first shot a 10-shot group of H&N Finale Match Pistol pellets seated flush with the breech. The group measured 0.963 inches between centers.

Then, I shot another 10-shot group with the same pellets seated deep. It measured 1.232 inches between centers. Clearly, the flush-seated pellets were best.


Flush pellets on the left, deep-seated on the right. The flush pellets are more accurate.

Air Arms Falcon
Next, I tried the Air Arms Falcon dome. Ten pellets seated flush gave a group measuring 1.163 inches between centers. Ten seated deep printed into 1.28 inches. This is too close to call.


Flush pellets on the left, deep-seated on the right. Too close to call.

RWS Hobby
The last pellet I tested was the RWS Hobby pellet. And here we had a reversal of the first test with the H&N target pellets –because the deep-seated pellets out-grouped the flush-seated ones. Flush-seated pellets grouped in 1.311 inches at 25 yards. Deep-seated pellets grouped in 0.888 inches, which was the best group of the test, though the initial sight-in group of Hobbys did group even better. But all the controls of the test weren’t in place when I shot that first group, so I can’t count it.


Flush pellets on the left, deep-seated on the right. This time, the deep-seated pellets performed best.

Bottom line
The results didn’t turn out as good as I expected. The 68 is accurate, but it’s not a 10-meter rifle in disguise. Having the trigger shoe makes the heavy trigger-pull comfortable, but a lighter pull would be much better.

As for the seating exercise, it seems to work with some pellets but not with others. And, of course, I haven’t yet experimented with different seating depths.

The next step with the 68 will be to disassemble the rifle and see what I can do to slick it up a bit.

author avatar
Tom Gaylord (B.B. Pelletier)
Tom Gaylord, also known as B.B. Pelletier, provides expert insights to airgunners all over the world on behalf of Pyramyd AIR. He has earned the title The Godfather of Airguns™ for his contributions to the industry, spending many years with AirForce Airguns and starting magazines dedicated to the sport such as Airgun Illustrated.

42 thoughts on “El Gamo 68/68-XP – A futuristic airgun from the past: Part 4”

  1. Trigger shoes are like tiny miracles.

    My prized Crosman American Classic 1377c was torturous to shoot for long periods due to its heavy pull and thin trigger blade. I polished up the trigger and sear at the mating points, which helped, but not enough. I also changed out the trigger spring, but the effort was still considerable.

    After installing a trigger shoe purchased on the yellow, it was like night and day. The carefully machined unit has two set screws and cost only $15. That is great value. The wide, smooth surface is now like a massage for my trigger finger. I can’t recommend them enough.

    • Two improvements I added to my Avanti 853 were a Gehmann target sight ($180.00) and a trigger shoe ($19.00). At 1/10 the price I’d say the trigger shoe had as much impact on accuracy as the sight.

      • matt,
        A trigger shoe is a flat piece that is wider than the trigger and it can either slip over the existing trigger or replace it entirely. It is a piece that is wider than a blade trigger and gives better leverage and comfort. The “blades” you refer to in the pic are not really blades but something to enhance it to prevent slippage, I suppose. Kinda more like grooves for better grip. If you look at the original trigger in the opening picture it is a blade, then look at the trigger shoe pic and you can see it is a flat piece with grooves.
        -Chuck

  2. Seasonal targets are up….

    Small crab apples ….found quite a few under a tree that were about paintball sized. Some a little larger, some a little smaller. Fun shooting off the tree too. They blow up with a good hit.

    Poke weed….Takes more than one shot to bring them down. They keep getting bigger.

    twotalon

    • Since it’s finally warmed up here, we’ve been into the CO2 guns lately was mini-sniping those steel casings that the cheap Russian ammo is loaded into. With a .308 case , only upper body shots count .

  3. BB,

    Assuming that you used the same relative point of aim, the groups with the seated pellets sure appear to be much lower on all but the last group of Hobbies. It sure looks like the velocity could be lower with the seated pellets, leading to additional drop. Did you do any velocity tests with the seated pellets? I know that when I tested it on my springers, it always resulted in a drop in velocity.

    Alan in MI

      • BB: I have an off-topic question. I’ve been messing with an old Crosman 101 (post war model) that I recently aquired ( it’s the first one I’ve ever owned). It is rough but I managed to reseal it, but what is your or perhaps some of the readers who have those guns opinion, on how much pump headspace should the gun should have? Another words what amount should it be overtoogled? I have it adjusted now so when I close the pump arm , at the last 3/4′-1/2″ it just snaps into place. Before it just sort of slopped closed and the power was down even with a new pump cup . I don’t want to over stress the linkage on the old gun. The best thing about this gun was the fact that the pivots and rivets in the linkage are like new. I’m getting 660fps with Hobbies and about 600fps with JSB jumbos now. Before I fooled with the linkage I was down about 100fps with both pellets. Thanks in advance for any help.

      • Let’s say we crafted the perfect rifle mount with a remote trigger engagement, eliminating all user generated hold and movement related issues. Yes BB, the perfect artillery hold. How accurate would this springer group at 25 yards? I’m starting to think that when the spring is released, it does not produce consistent reactions (recoil, twist and other variables) shot to shot. Call these uncontrollable variables. These cannot be resolved by using the perfect pellet, or perfect seating, or the perfect hold. Unless we find a way to measure the impact of these uncontrollable variables, I think it makes it more difficult to interpret the results. Let’s say we knew for each shot fired, that it could vary randomly in any direction .25″ at 25 yards due to uncontrollable variables, would we interpret the results differently? Couldn’t this allow for a great group one day, and an OK group the next?

        • TC,

          Yes, a springer’s vibrations are what make it such a difficult gun to shoot accurately. A spring rifle with a good barrel has the potential of grouping just as tightly as a precharged pneumatic. What prevents it from doing that is how the vibrations at firing are handled. And the artillery hold is the only practical way I know of countering them.

          B.B.

          • BB,
            If I understand your response correctly, a springer is hold sensitive, much more so than say a PCP, but with proper hold it can be as accurate as a PCP. The point I was trying to make is that many springers also include uncontrollable movement that is random in nature and cannot be corrected. I was thinking there is an innate movement issue above and beyond what proper hold can address. So what springers do you recommend that are not hold sensitive? If my goal was consist ant 1″ 10 shot groups at 50 yards, that didn’t care how it was held, what would you recommend?

            PS: This is becoming an addictive hobby for me. I can tell others here have a more serious bug than me. 🙂

            • TC,

              All my regular readers will know what I’m about to recommend.

              A TX 200 can do what you want — but the conditions have to be perfect (no wind) and you have to be an excellent shot!

              Or you can do the same and better with a Benjamin Marauder or a Talon SS while holding either rifle like you’re in a shooting galley.

              B.B.

                • BB,
                  Great response. Sounds like you have been down this path before. When I had an older Sheridan Blue Streak, I could hit the same spot time after time with open sights. If I missed, it was either a bad pellet or me. I love the simplicity and power of a springer, and accuracy is acceptable, but not optimal. I’m thinking a marauder is a better match, hitting bulls-eyes at 50 yards, even with my eyes closed.

            • TC, note well, that truly random movement in springers is not correctable, but if it’s that bad, you might want to try a different gun. The beauty of the artillery hold is that you don’t need to compensate. You just let the rifle do its thing, and with a relaxed hold, it should return to the starting point.

              Matt61

              • Matt61,
                I decided to experiment. New stock spring length is 10.25″. I have a few extra springs, and decided to cut off 1″, taking overall new length down to 9.25″. I could remove another .5″ and it would still provide tension when installed, but that modification can wait for another day. With a stock spring,velocity averages 810 fps using 10.3 grain. I estimate the new fps will drop to low 700s. My premise is that taking off one inch should reduce spring sourced movement and my overall accuracy should increase. I’m not sure if this premise is correct, and if so, how much it will reduce unwanted movement. A few shots indicate that the spring fire action is smoother, it is not as loud, and the scope aim does not bounce as much off target. I’ll need to find some time to measure the new average fps and accuracy. I guess I’m detuning to tune. Has anyone done this before?

                • I detuned a QB36-2 by replacing the spring with a lighter, shorter Maccari spring that fit. I don’t have a chrony, but it did what I wanted in terms of trajectory and improved accuracy/firing behavior. I did have to space it up some to get it where I wanted, but that was part of the plan. One thing you need to be aware of is that spring power is over-rated in terms of how much impact it has on power output — the swept volume of the piston is much more critical. That is to say, you may not lose as much velocity as you think. Due to market demands, “they” put as much spring into the rifle as they can fit to eke out every little fps, but the returns diminish quickly near the maximum, and backing off just a little can make the behavior much better without losing much of anything significant in terms of energy. Good luck and have fun — you’ll learn more than you lose even if it is a complete failure (which I doubt it will be) :)!

  4. I hate to say it, but that old Gamo 68 looks like it out shoots my new Slavia 634 .22. Even after the work I put in it. Got a couple more things to try on it before I give up and sell it. Which would be a shame since I really like the way it fits me…

    /Dave

  5. B.B.,

    Your passion for this gamo 68 is palpable. Jim in pgh has been around the block and he described shouldering his gamo 68 as, “they come up, settle in, and point almost instinctively.”

    Since I’ve never seen on of these in person it’s unlikely that I would be able to shoulder one before buying so here’s my question. Based on the short eye relief of the bugbusters I’ve owned and the long length of pull on the gamo 68 it appears that your cheek weld would have to be very far forward on the stock with your lips almost touching the metal on the compression tube. That seems awkward. What am I missing? Does your bugbuster have a long eye relief?

    kevin

    • Kevin,

      I guess I didn’t say it strongly enough. The eye relief on this setup is perfect for me! That is what I meant by a “happy accident.” Now please remember that I am very accommodating when it comes to fit and you may not find the same thing as I did, but — WOW! I really like the way this rifle fits me.

      However, I will go back to open sights, just out of personal preference.

      B.B.

  6. B.B., thanks for another round of informative tests.
    I haven’t been doing as well as I hoped, but hope springs eternal. You and others know well what I mean.
    It has only been three months since the surgery.

    Best to all of you,
    Ken

  7. Not to sure about the accuracy here. But a fun shooting experience is reason enough for me.

    Desertdweller, yeah it must have been pretty bad for the Irishman who goofed. One reason I’m not crazy about participating in team sports.

    Matt61

  8. Robert Law introduced the El Gamo to the United States market when they were being manufactured in Spain. Production then moved to Brazil and the quality, such as it was, suffered. One of my tests for accuracy in a spring loaded air gun was breech movement with the action closed. the El Gamo 68 had lateral movement and just a hint of looseness in the breech. We at ARH checked all incoming guns and hand-selected the ones with the least movement for premium sales and sold the others at reduced cost. All in all, for money, not a bad little gun, and it looked good too.

Leave a Comment

Buy With Confidence

  • Free Shipping

    Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

    Free shipping may not be combined with a coupon unless stated otherwise.

    View Shipping Info

  • Shipping Time Frame

    We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays because we know how excited you are to receive your order. Weekends and holiday shipping times will vary.

    During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.

    View Shipping Times

  • Shipping Restrictions

    It's important to know that due to state and local laws, there are certain restrictions for various products. It's up to you to research and comply with the laws in your state, county, and city. If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.

    U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.

    View Shipping Restrictions

  • Expert Service and Repair

    Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.

    If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.

    By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.

    View Service Info

  • Warranty Info

    Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.

    A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.

    View Warranty Details

  • Exchanges / Refunds

    Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.

    If you need to return an item please read our return policy.

    Learn About Returns

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.