My new Benjamin NP Limited Edition: Part 2

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1

Today’s report is a second installment from our blog reader RifledDNA, a.k.a. Stephen Larson. He’s modified his new Benjamin NP Limited Edition and wants to tell us how it’s going.

If you’d like to write a guest post for this blog, please email me.

Over to you, RifledDNA.

Benjamin NP Limited Edition
Benjamin Nitro Piston, Limited Edition. This is what the rifle looks like out of the box.

Today is part 2 of my new NP Limited Edition, and we’ll look at what’s changed on the .22-caliber rifle since I took it out of the box, what pellets it likes so far and the accuracy I’ve been able to achieve. I wrote an earlier part 2; but the day after it was finished, Crosman alerted me they had a new stock for me. A few days after that, my order of pellets would arrive. It made sense to wait until these things were available for inclusion in this report. Both packages arrived, the stock was installed, the pellets have been tested and I can now tell you everything that has happened in one big mess of journalistic chop suey. read more


My new Benjamin NP Limited Edition

by Tom Gaylord, a.k.a. B.B. Pelletier

Today’s report is a guest blog from reader RifledDNA, a.k.a Stephen Larson. He wants to give us his impressions of a new Benjamin NP Limited Edition he recently received.

If you’d like to write a guest post for this blog, please email me. 

Over to you, RifledDNA!

Benjamin NP Limited Edition
Benjamin NP Limited Edition.

Good-day everybody. Today, we’re going to take a look at the Benjamin NP Limited Edition. These are my impressions of this airgun as I’ve unboxed it. Others may have different results, as no two airguns are the same.

To start, let’s look at what the NP Limited Edition is. This is a .22-caliber breakbarrel air rifle powered by Crosman’s Nitro Piston, hence the NP designation. The Nitro Piston is a nitrogen gas-filled piston that has many advantages over the traditional coiled steel spring powerplant. First, a gas piston is less affected by temperature. The nitrogen gas continues to compress and expand consistently even when the temperature drops. A steel spring is coated with lubricants that stiffen and do not want to move as fast in cold temperatures. read more


Crosman MTR77NP scoped air rifle: Part 4

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1
Part 2
Part 3

Crosman MTR77NP scoped air rifle
Crosman MTR77NP air rifle

Today, I’m testing the Crosman MTR77NP scoped air rifle for accuracy at 25 yards. This is going to be a very different accuracy report, for I have no targets to show you. Well, there is one target, but it wasn’t shot with the test rifle.

What gives?
In the last report, I mentioned that I wanted to mount a different scope on the test rifle and test it at 25 yards. I thought the Bug Buster 3-9x scope would be a good one, and I also shimmed under the rear ring because the rifle was shooting low in the 10-meter test.

I thought the rifle would group about 3 times larger at 25 yards than it had at 10 meters, but I also hoped some pellets might remain tighter than that. What happened, however, was just the reverse. Instead of 3-inch groups I got 5- to 6-inch “patterns.” I won’t call them groups because not all pellets fired even hit the target trap. And when that happens, I stop shooting that particular pellet immediately. read more


Crosman MTR77NP scoped air rifle: Part 3

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1
Part 2

Crosman MTR77NP scoped air rifle
Crosman MTR77NP air rifle

Today, we’ll look at the first of 2 accuracy tests planned for the Crosman MTR77NP scoped air rifle. As you know, this rifle has no open sights; so, the first thing I did was mount the Centerpoint 4X32 scope that’s included with the gun. That went quick because the scope caps have 2 screws each, but there was no slippage of the scope in the rings during this test.

The scope is very bright as you would expect a 4X scope to be, but at the 10-meter distance I shot in this test, it was fuzzy. The parallax is fixed for a further distance that isn’t indicated on the scope. I can tell from examination that it’s set farther than 25 yards. read more


Crosman MTR77NP scoped air rifle: Part 2

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1

Crosman MTR77NP scoped air rifle
Crosman MTR77NP air rifle

Today, we’ll test the velocity of the .177-caliber Crosman MTR77NP scoped air rifle. This rifle has a Nitro Piston, which is Crosman’s gas spring, so it should be interesting. The advertised velocity is 1,200 f.p.s., which we must assume is with a lightweight, lead-free pellet.

Blog reader John asked me if the front sight base is on tight or does if it rotates around the barrel. The one on this rifle is firmly in place, but I thought it would be good to show you how the front sight base is attached to the rifle. It’s part of a synthetic sleeve that goes over the end of the barrel, and I assume it’s held in place by epoxy. That would be the most cost-effective method of doing it. John mentioned the possibility of a splined barrel and jacket, but that has a number of problems. It involves extra manufacturing steps (the cutting of the splines); plus, it runs the risk of being installed in a not-perfectly-straight orientation that would cause a lot of problems with sales and returns. Epoxy has none of those problems and costs very little. read more


Crosman MTR77NP scoped air rifle: Part 1

by Tom Gaylord, a.k.a. B.B. Pelletier

Crosman MTR77NP scoped air rifle
Crosman MTR77NP air rifle

With the Christmas season approaching, I’m on the fast track to test several new airguns this month. Today, I want to begin our look at the Crosman MTR77NP scoped air rifle. It’s a .177-caliber -only copy of the M16. When I saw this one at the 2013 SHOT Show, I couldn’t believe my eyes! I actually had to break it down to prove it was a breakbarrel spring rifle because the M16 look is so authentic. But for a couple small clues, you would say the same thing.

And now that I own an AR-15, I’m no longer the barnyard Bubba whose last recollection of a military rifle is a Garand or a Mauser. I know what a black rifle looks and feels like, and I tell you — Crosman has nailed it with this one. And, when the barrel is closed, it’s just as solid as the firearm it copies. But the one thing I could not do at the show was cock the gun because the SHOT Show doesn’t allow firearms or airguns that are capable of firing to be displayed. So, the spring unit was out of the gun on display. I’ve been waiting all year for the opportunity that is now before us. read more


Benjamin Trail NP pistol: Part 6

by Tom Gaylord, a.k.a. B.B. Pelletier

Part 1
Part 2
Part 3
Part 4a
Part 4b
Part 5

Benjamin Trail NP pistol
Benjamin’s new Trail NP breakbarrel pellet pistol, with cocking aid removed.

We’re certainly getting a good look at the Benjamin Trail NP pistol! While the title says this is Part 6, it’s actually the 7th report because Part 4 was so large it had to be broken into two parts.

Let’s look at the performance of the pistol after break-in. This test pistol has been shot so much that it’s now broken in, so today we’ll look at the velocity. Crosman says in the owner’s manual that the pistol needs several hundred shots before it’s fully broken-in, and this gun certainly has that many shots through it. read more