Roll over image to zoom in
1-year limited warranty
List Price $120.00 Save $21.00 (17%)
as low as $17/mo with
Only 4 left in stock
For professional installation only.
Create an online review and share your thoughts with other customers
Things I liked: Fast service and a fantastic product.
Things I would have changed: Install a better air gauge
What others should know: The air pressure is not correct on this product. However, it is close probably within 200-400 psi.
Things I liked: It was very easy to replace the regulator that I broke foolishly. I have a few carbon fiber tanks and my Air venturi is the only one that you must use a different port while charging up the tank. If you try to fill the tank using the output port instead of the intake port you will eventually destroy the regulator. The warnings are all over the place. It's my fault but it was very easy to fix with this OEM replacement port.
Things I would have changed: Clearer instructions on what to expect when removing the old one and installing the replacement. If it's really tight you may think it's seized up or your doing something wrong. Your not. It is really as simple as unscrewing the old one and screwing in the new one the new one. You need to have the bottle extremely stabilized to get a good grip. I strapped mine to a deck post using a rubber strap to get the first turn started. It was very tight. But No tape or sealant needed. Hand tightening is sufficient. Could be a little less expensive. The bottle cost 300$ and this part cost 100$.
What others should know: The warnings on how easy it is to ruin your regulator are accurate and not overkill. It won't take long to ruin it if you try to fill your tank incorrectly but you can fix it. so it's not a total waste.
Things I liked: Seems to work pretty good , it's the only game in town to use a paintball size tank for pcp pellet guns .
Things I would have changed: I have three reg. and all three are set at 2600 - 2700 psi . I wish they could be tweaked up to 3000 psi so I could get more shots per top off .
Create an online review and share your thoughts with other customers. Show Other Reviews
Where can I get a rebuild kit for this regulator? I need the black ball seal.
Give Air Venturi a call, they should be able to assist.
what is the proper assembly of the spring pack in regulator on air venture 90 cu in tank
is the thread size on this regulator 5/8-18u.n.f.2.b and compatible with the ninja 4500 psi input carbon fiber tank. I raelly need these questins answered so I can contiue with my purchases my email is [email protected], please I really need this answered as i have a ni nja 1200 psi output valve i would like to change out Thanks kevin
yes, they are compatible. I also e-mailed you.
Only 2 left in stock
Only 3 left in stock
Only 5 left in stock