Roll over image to zoom in
90-day limited warranty
List Price $30.00 Save $2.01 (6%)
Only 2 left in stock
Attach this air stripper to your Hatsan .177-caliber airgun to reduce air turbulence, which should increase your accuracy.
Create an online review and share your thoughts with other customers
Things I liked: it fits more airguns than you think. like my walther terrus. add a spot of machine grease to hex head adjustment screw.. as if you will need to adjust it . puts up better groups. use crosman ex destroyers only. cheap. effective. range worthy. a great little unit. should not give your rifle barrel droop.if not cheap.
Things I would have changed: nada
Things I liked: The price was right and it looked liked it might work for my LGV Master (based on the other reviewer who had it on his Walther Challenger). The machine work and finish was acceptable.
Things I would have changed: The depth of the threaded section of the stripper was too deep for the LGV and the center section of the stripper could not adjust close enough to the barrel end for my liking so I returned it.
What others should know: This stripper did fit onto my LGV but the 20mm thread depth (compared to the 11-22mm threaded barrel end) created too much space for the center section to adjust to. I ended up ordering a Rowan Engineering unit and while that cost a lot more, it was a much higher quality stripper and I could adjust the brass center section closer to the barrel end than this Hatsan unit.
Things I liked: Accuracy is good after putting it on!
Things I would have changed: make the metal on the thinnest parts thicker, so they can be safely used as leverage for breakbarrels
What others should know: HAVE CAUTION when using on a break barrel, don't put too much pressure on this. Mine feels solid, but somewhere online I saw that someone used this as leverage and it broke and cut open their hand. I'm currently just grabbing the barrel itself and cocking the gun, which is no biggie.
Create an online review and share your thoughts with other customers. Show Other Reviews
Would this fit a Walther Terrus
Can this fit on a Air Hawk rifle .177 cal?
If not is the one that will work or fit 177 gladius suppressor
There is not one currently available through Hatsan that will fit onto the QE shrouds