Posts Tagged ‘Benjamin MAV 77 underlever air rifle’
by B.B. Pelletier
Today, we begin our look at the accuracy of the legendary TX200 Mark III. Since the rifle has no sights, I mounted a Hawke 4.5-14×42 Sidewinder Tactical scope in two-piece UTG Accushot 30mm medium rings. These rings are tall for a medium-height ring, but the TX200 cheekpiece is so high that many higher rings will be just right and fit the shooter perfectly. I know they come very close to a perfect fit for me, and the 42mm objective bell still clears the spring tube by a lot.
I’m showing a photo of the rifle with the scope mounted because you’ll see that the end of the scope hangs over the back of the loading port. In a TX200, that isn’t a problem unless you have summer sausages for fingers, because the loading port is very large — but on other underlevers and some sidelevers it may be. The Hawke is not a long scope, so this clearance is something a new TX owner needs to consider.
What pellets to shoot?
This question is the one every shooter asks whenever they get a new gun — air or firearm. I have a lot of history with this rifle, but in the time since I last shot it many good pellets have come to the forefront. The JSB Exact RS is just one example. I know that Crosman Premier 7.9-grain domed pellets are averaging 958 f.p.s. in my rifle, and that means the lighter 7.3-grain JSB Exact RS will probably top 1,000 f.p.s. Six months ago, that might have turned me off; but after the exciting 11-part “Pellet velocity versus accuracy test” proved that harmonics and not velocity is what causes inaccuracy, I see no reason not to try a faster pellet.
I sighted in with Beeman Kodiaks, just because I used to shoot them in my other TX for field target, and they always worked well. But in reviewing my past reports, I see that this will be the first time I’ve shot 10-shot groups for a report. What a difference that makes!
Naturally, group one was with the Kodiaks. I had hoped to shoot around my aim point, but as you’ll see, that didn’t happen. The group may be a trifle larger than it should be, because for the last four shots I was guessing where to put the crosshairs.
Notice how round the group is? Actually only the first shot went low and right — the rest made that small hole you see. And that was exactly where the aim point was, so after six pellets there was nothing to guide on. Nine of the ten pellets went into a group measuring 0.302 inches!
Next, I tried 10.34-grain JSB Exact Heavies. Often, I get the best results with this pellet in an accurate .177 rifle. Ten shots in the TX made a group that measures 0.523 inches. Let’s see what that looks like.
Next, I tried the light JSB Exact RS pellet. The point of impact shifted up about an inch, and the group opened to 0.687 inches. It’s still fairly round, but more open than the first two by a lot. The RS probably isn’t the pellet for this TX.
Then, I tried 10 Crosman Premier lites, just to see what they would do. They made a pleasing group that measures 0.559 inches between centers.
By this time, I was remembering everything I liked about a TX200. For one thing, it’s not at all sensitive to the hold. In fact, this is one of the very few spring-piston air rifles that can be shot while rested directly on a sandbag. To demonstrate that, I shot 10 more Premier lites with the rifle rested on the bag. I had run out of targets on this sheet, so I used a single pellet hole for my aim point. Ten shots went into a group measuring 0.414 inches between centers — the smallest group of the entire session!
Ten 7.9-grain Crosman Premier pellets made this 0.414-inch group at 25 yards when the rifle was rested directly on a sandbag. The hole at the 7 o’clock position and outside the group was the aim point and is not a part of this group.
The bottom line
I hope this test demonstrates the accuracy potential of the TX200. Also, I hope you appreciate how important it is that the rifle isn’t sensitive to hold. It will make a better shooter of almost anyone! Of course, I used the very best scope I have for this test; but besides that, nothing special was done. I didn’t even use a scope level.
Have you noticed how similar in size all the groups seem to be? The rifle seems to like a lot of different pellets. That’s another plus, and a good reason why this rifle is worth the price.
I love this rifle because it doesn’t fight me. I can relax almost as though I was shooting an accurate PCP. And I’ve adjusted the trigger to such a fine point that it doesn’t disturb the finest aim when it’s pulled. No wonder I compare other spring rifles to this one!
We now have a baseline for the TX200; so when the Benjamin MAV 77 becomes available, we can compare it.
by B.B. Pelletier
Photos by Earl “Mac” McDonald
This is the second of my reports on the 2012 SHOT Show. There will certainly be at least one more after this, and perhaps even more, as there’s simply too much new information to pack into a single report.
The state of the airgun industry in 2012
Before I get to some specifics, I want to make a general observation. This year’s SHOT Show was different for me in a major way, because I saw for the first time that firearms shooters are beginning to understand airguns as never before. In the past, I always had to start my explanations with the cooling of the earth’s crust and then progress through the age of the dinosaurs because each firearms person I talked to thought of airguns as either toys or BB guns. This year, a lot of them were clued-in on what’s happening. They weren’t surprised by the accuracy we get, and they knew about big bores. A lot of them had some airgun experience and more than a few asked me the same kind of questions that I get from long-time readers of this blog.
That tells me the day of the airgun has finally dawned in the U.S. Instead of 25,000 to 50,000 active shooters (at best!), we will now see an influx from over 5 million active firearm shooters who are ready to augment their shooting experience with airguns. I’m already getting calls and emails from state departments of wildlife resources, asking about the issues of incorporating airguns into their hunting seasons.
It has been a long haul to get to this point, but we’re now seeing the start of the harvest of all the work that’s been done over the past 40 years — starting with Robert Beeman in the early 1970s. The job is now to manage this growth and provide useful information to the tens of thousands of new airgunners who are flooding in the doors.
Let me reflect on how the industry seems to be reacting to this trend. Some companies have been on board for many years and are poised to ride the new tidal wave of business as far as they can. Other companies are aware that airguns are very hot, but they’re foundering, trying to understand them. Let me say right now that it’s not as easy as you think!
The readers of this blog are among the most clued-in airgunners in the world. But they’re unique, and they do not represent the true market. The demographic of a new airgunner is a man (usually) in his late 20s to late 40s who is most likely a fan of AR-type rifles and Glock-type pistols. He wants repeaters, semiautos and he thinks that a five-shot group is the gold standard of any gun. Velocity impresses him, and he isn’t comfortable with the term kinetic energy.
Things like good triggers and good sights are not an issue with this customer until he experiences bad ones. His ARs have decent triggers off the rack, and he can choose from many drop-in triggers that are much better. When he encounters a spring-piston gun with a horrible trigger that cannot be easily modified, he’s surprised.
He does not use the artillery hold, and he equates all airguns to be alike in terms of performance. When he learns about precharged guns, he’s put off by the additional equipment he must buy. Spring-piston guns seem the best to him for their simple operation, and he doesn’t appreciate the fact that they’re also the most difficult airguns to shoot well.
That’s the customer who’s coming to airguns today, so that’s the person airgun manufacturers have to deal with. If you have wondered why many of the new airguns are what they are — this new-customer profile is the reason.
Okay, I’ve talked about those companies that get it and those that are struggling to understand. There’s one more type of company out there. I like to call them the “gloom and doom company” or the “zero sum company.” They’re firmly entrenched in the 1970s and cannot take advantage of this new windfall of business. They either fired their engineers years ago or they let them all retire, and now they couldn’t build a new airgun to save their lives. As far as they’re concerned, there are only 25,000 airgunners in the United States and it’s the NRA’s responsibility to identify and train them so these companies can sell them some guns.
They think of marketing in 1950′s terms, when a simple paint job and some sheet metal was enough to create a new product. Their “secret” business plan is to buy guns made by other manufacturers and have their name put on. If you’re a collector, better buy up the guns these guys sell because in 10 years their name will be a memory.
That’s enough of the big picture. Let’s see some more products.
More from Crosman
Many of you saw the list of new Crosman products Kevin posted last week, so the few that I show here are by no means all there is, but they’re the highlights. Crosman had about half the new airgun products at the entire SHOT Show.
New tan M4-177 and carry handle
The M4-177 multi-pump that I recently tested for you is going to be very popular this year. Crosman is also offering it as an M4-177 Tactical air rifle with a new carry handle that replaces the rear sight for improved sighting options. I think this gun will be in their lineup for many years to come.
I mentioned to Crosman’s Ed Schultz that this rifle looks like the A.I.R.-17 of the 1990s, but done better. He said he always wanted to update that design, and that is exactly what this is. So, what he said next came as no great surprise.
I shared my thoughts on a 2260 made as a multi-pump in .25 caliber, and Ed told me that was how the rifle was originally created (not in .25, however). The CO2 version was an afterthought that got put into production, while the multi-pump version languished in the Crosman morgue. I told him that I thought the time was ripe to bring it back as an upscale hunting rifle, and he seemed to agree. We can only hope.
Carbon fiber tank
As Crosman extends their capability into PCP guns, they know shooters are always looking for better options for their air supply. Besides the new butterfly hand pump I showed you last time, they’ll also be adding a long summer-sausage black carbon fiber tank with increased capacity over their current tanks. This is a 300-bar tank that has 342 cubic-inch capacity. It comes in a black nylon carrying case with sling for field transport.
More air for you! New Benjamin carbon fiber tank will help you take your PCPs further afield.
Benjamin Nitro Piston breakbarrel pistol
The Benjamin NP breakbarrel pistol certainly has people talking on the internet. This is the first commercial gas spring application in a pistol, I believe. The most distinctive feature is a cocking aid that can either be detached or left in place while shooting. That reminds us that this pistol is going to be hard to cock, but I’ll test one for you so we’ll all know just how hard.
New Benjamin Trail NP pistol is a breakbarrel with a gas spring. The cocking aid can be detached or left in place while shooting.
Crosman 1720T PCP pistol
Everybody was ready to jump down Crosman’s throat for creating the 1720T PCP pistol. They wondered with the .22-caliber Marauder pistol and the .177-caliber Silhouette PCP pistol already selling, why was this one needed? As Ed Schultz explained it to me — this one is for field target. It’s a .177 (naturally) that produces just under 12 foot-pounds through a shrouded Lother Walther barrel. It can be used for hunting, but field target was its primary purpose. They worried about the shot count with the Silhouette; but with this one, power was the criterion. Look for about 800 f.p.s. with a 7.9-grain Premier. And the trigger is the same as the Marauder, so excellent operation there.
Crosman MAR 177 PCP conversion
The Crosman MAR-177 PCP conversion is another new product that has a lot of people talking. This AR-15 upper converts your .223 semiauto into a .177 PCP repeating target rifle. Because it’s on an AR platform, almost everybody expects it to be semiautomatic — including those who should know better. This rifle is a bolt action that cocks and loads via a short pull on the charging handle.
This conversion is an Olympic-grade target rifle for a new official sport that Scott Pilkington and others have been promoting for several years. It will take the U.S. battle rifle back into the ranks of target shooting. However, the look of the gun has many shooters totally confused. I was even asked at the show if I thought Crosman should have come out with an “everyman’s” version of the gun first. That would be like asking whether Feinwerkbau missed the boat by not first making their 700 target rifle in a $300 version for casual plinkers.
Crosman TT BB pistol
It’s all-metal and a good copy of the Tokarev pistol. The weight is good and the gun feels just right. This will be one to test as soon as possible.
Crosman’s TT Tokarev BB pistol is realistic and looks like fun.
Benjamin MAV 77 Underlever
The Benjamin MAV 77 underlever rifle is going to force Crosman to recognize spring-piston air rifles instead of just calling them all breakbarrels. This is the TX-200 copy from BAM that was once sold by Pyramyd Air. When the quality dropped off, it was discontinued. Hopefully, Crosman will watch the quality on this one.
They didn’t have a firm retail price yet, but hopefully it’ll be significantly under the TX. Otherwise, why buy it? I may test one for you, but I already know that BAM can make a great rifle when they want to. I think it all comes down to price.
Benjamin MAV-77 is an underlever spring-piston rifle that looks and, hopefully, performs like an Air Arms TX-200.
The Crosman TR-77 is a conventional breakbarrel spring-piston rifle in an unconventional stock. It’s different enough that I want to test one for you. It appears to be a lower-powered rifle that probably sells at a bargain price because it’s branded under the Crosman banner rather than Benjamin. Mac photographed one in a sand-colored stock for you.
Crosman TR-77 breakbarrel in a sand-colored stock also comes in black.
There was a lot more at Crosman that I could have mentioned, but now let’s go over to the Leapers booth.
I’ve watched Leapers grow from a relatively small company back in 1998 to a major player — blasting past older, entrenched companies as they grew. This year, they were playing a video about the company on a continuous loop in their booth. I was impressed to see their plant in Livonia, Michigan, where they build airsoft guns, tactical mounts, accessories and scopes right here in the U.S. The plant is filled with many CNC machining centers and testing facilities to keep close watch over their products during development.
Leapers owner David Ding told me he wants to get control over the production process so he can assure the quality of all of his products. In keeping with that goal, I was shown the new scope line for 2012 that now offers locking target knobs on all of the upscale models. Many of them feature etched glass reticles that are amazingly crisp and sharp.
Mac was impressed by the reticle on the new 3-9x Bug Buster scope. He urged me to look through it; and when I did, I saw that the reticle is now fine and sharp — not the heavy black lines of the past.
David Ding shows me the new 3-9x Bug Buster scope (not out yet), with target knobs and a finer reticle.
But scopes were just the beginning at Leapers. Next, I was shown the whole line of tactical flashlights and lasers, including some mini lasers I will test on my M1911A1 for you. These are all made in the U.S. now and have more rugged internals, adjustments and optics than similar products from the Orient.
UTG 555 Long Range Light
One item I hope Pyramyd Air will consider stocking is a fantastic 500-lumen tactical light for law enforcement. It can be mounted on a rifle, handheld or even mounted on a bike! It comes with rechargeable lithium batteries and a smart charger…and believe me when I tell you it turns night into day!
The UTG Long Range light can go on your rifle, held in the hand or even mounted to your bike! The rechargeable lithium-ion battery pack will keep it shining at 500 lumens for 1.5 hours.
Fast Action Gun bag
Not all Leapers products are for airguns. They also make tactical and law enforcvement gear that rivals spec-built equipment but sells at a fraction the cost. As a result, many of their customers are ordering straight from the front lines of combat and from law enforcement agencies all over the country to get the products that their own supply lines cannot or will not furnish.
One of their latest developments is a Fast Action Gun bag that lets the wearer walk in public with a substantial firearm hidden from view. A quick pull of a strap, and the bag opens to reveal the weapon inside.
Leapers owner Tina Ding models their new Fast Action Gun bag. Here, it’s concealed; but she’s just pulled it over her shoulder from her back, where it looks like a tennis bag.
And in less than a second, the bag is open, giving instant access to the tactical shotgun or submachine gun inside.
Leapers has an entirely new range of quick-disconnect scope mounts coming this year, but there’s another innovation that I think you’ll find even more impressive. It’s an adapter that snaps into a Picatinny scope mount base, turning it into an 11mm dovetail. So, your conventional air rifle will now also accept Leapers Picatinny scope mounts with this adapter.
11mm-dovetail-to-Picatinny adapter is small and doesn’t raise the mount at all! This will be one to test!
Leapers is still the company to watch because the owners want to build a lasting corporation here in the U.S. They’re poised to move to the next level of quality in their optics, which gives me a lot of hope for the future — they’ve always been receptive to the needs of airgunners.
Whew! That’s a lot of products, and there are still many more to show. As I said in the beginning, there will be at least another report.