Air Venturi Scuba Yoke, Female Quick-Disconnect

This product works good and is will make

Nothing

Good price

Solid well built and it works flourlessly.

Gauge could be little larger, sometimes its difficult to read. Perhaps digital.

I feel its the best least expensive and fastest way to charge your rifle.

Good and Solid US-made Works Great!

Use standard 1/8" BSPP threads on the QD!

This yoke works quite well for its intended purpose, fits and fills my Air Force TalonSS just great, the gauge is way off by comparison to my Talon's, and considering that the Talon was reading 3000PSI when the freshly-filled tank stopped flowing, and the yoke read 2600... It DOES fill just fine, though, with no leaks at all.

Using it without a hose is a bit tricky, you have to lock the gun rigidly to the tank, but it does work. Which brings me to my only real gripe with it. This does NOT use standard 1/8" BSPP threads to attach the female QD. I suspect it might be ANSI, but be aware that the Air Venturi hose will NOT fit this! The male threads on the hose will fit the yoke loosely, but the male threads on the QD here don't even come close to fitting the female hose end.

That being said, again, this WILL fill your gun just fine, and is about the most inexpensive and robust piece of hardware around for the job!

First of all it is well built. It is smooth no sharp edges. Works as intended the guage is very accurate. No leaks at all. I did add a hose to it with the existing foster fitting for some flexibility.

Nothing at all. It's worth the money.

The knob that clamps it to the bottle came loose, A little red thread locker solved that problem.

Simple to use and configure with different connectors.

The bleed valve button could be a bit bigger. Many have had issues with the pressure gauge not reading right. I have three of these and all read very close.

Anytime you need to use another connector for a different airgun, do not forget the thread tape else you will leak off some air as you fill your gun.

The strong construction, legible writings make it great

Nothing

This is a great tool for the money

This scuba tank adapter is well make and has nice compact design. I would recommend purchasing this adapter.

On the side of the adapter is a screw knob to vent off the pressure before its disconnected from the gun. What I would like to see is a larger knob which would make it easier to use. It would be nice if the pressure gauge was larger and easier to read.

This is the second adapter I purchased. The first one the pressure gauge was way off by 700 psi. The second one was closer to the true pressure.

Solid piece of work. I use it on a Shin Sung Career III 707 and it works great. I like the relief valve, it's definitely a needed feature. Easy to use right out of the box. Decent price!!

Replace the gauge to a more readable and accurate one. Mark the relief valve for easier open/closed viewing. Other than this, it's pretty cool stuff!!

This won't fit on the lower profile K-Valves. The sides of this adapter are too wide! It fits perfectly on regular K-Valves though. I also used plumbers tape when I attached my hose/adapter setup for more secure fit.