Date: 28/9/2020 17:30
0
Airgun Hunting is Legal! Check to see what is allowed in your state ⭢ Check It Out!

Air Venturi Tank with Adapter, 13 cu in, Aluminum, 3,000 psi

4.06 reviews
Air Venturi Tank

Roll over image to zoom in

See customer imageShare your images

Pick Your Option

1-year limited warranty

PY-A-7456

$89.99

List Price $99.99 Save $10.00 (10%)

Add to Cart

In-stock

Estimate Shipping

Add to Compare
Add to Wish list

Air Venturi Tank & Adapter

  • 13 cubic inch D.O.T. and TC approved aluminum bottle
  • 3,000 psi maximum pressure (206 bar)
  • Regulator output pressure of 1,100 psi
  • Fill via male quick disconnect fitting fixed on valve assembly
  • Bonnet thread
  • DOT, low pressure burst disc
  • Restrictor, bleed hole and safety groove
  • Mini fill valve is hardened, plated
  • Weight: .5 lbs
  • Height: 9.5"
  • Diameter: 2"
  • Black


For additional shot consistency and charging convenience, you'll love converting certain CO2 guns to high pressure air. Choose this exceptionally lightweight tank with it's integrated regulator and enjoy thousands of shots from the 3,000 psi charge.

The Air Venturi 13 oz. aluminum high pressure air tank is the perfect pairing for many airguns and a common modding accessory.  It's particularly useful for QB79 owners.

Please Note:  This high-pressure tank must be filled through the male quick-disconnect on the neck. Before buying, please contact your local air supplier to see if they can fill this tank. Paintball stores may be able to fill your tank, so you may be able to find a fill source through them.  Many fill sites may be able to fill your tank but may need an adaptor to do so.


In stock


Item Code: AV-4513HPA-KIT [PY-A-7456]
youTube video
See manual

other products by Air Venturi

Share
Weight0.5 lbs
See manual

other products by Air Venturi

Share

Average Customer Review

4.0 (6 reviews)
3 star2 star

Create an online review and share your thoughts with other customers

4.0 4.0

5.0 5.0

By Terrell, from USA on 2020-08-10
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Nice build. And regular is modifiable.

Things I would have changed: Provide a few washers, for adjusting the regulator if needed.

What others should know: For the Sig MCX the pressure was to high (1100 ) and may have caused a seal issue. Lowering the pressure to 900 is alot safer and better.

 

4.0 4.0

5.0 5.0

By Terrell, from USA on 2020-08-10
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Nice build. And regular is modifiable.

Things I would have changed: Provide a few washers, for adjusting the regulator if needed.

What others should know: For the Sig MCX the pressure was to high (1100 ) and may have caused a seal issue. Lowering the pressure to 900 is alot safer and better.

 

1.0 1.0

1.0 1.0

By Gregory from USA on 2020-08-04
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: The tank it's self is Great! Holds air fine.

Things I would have changed: The adapter is the worst piece of machining I've ever seen. The threads are terrible. The first tank and adapter I worked on a little bit at a time backing it off each time until it should have been far enough to open the valve on the tank because it wouldn't go any further. Aired the tank up but still no air through the adapter. Then when I tried to remove the adapter it wouldn't budge. I contacted PA to return it. I didn't get a response. I ordered another tank and adapter and ran into the same issues with the threads on the adapter. I didn't try to work this one on. I ordered a different make adapter and what a nice piece of machining! Screwed right on and "I got air" the next day I carefully cut the jambed adapter off the first tank not to damage the threads and now I have 2 good tanks. The other adapter has three ports for the air to go through not just one like on these air Venturi ones. Two days after going through all this, PA finally sent me a RMA. Almost 2weeks later.

What others should know: Buy the Air Venturi tanks but stay away from their adapters .... they are terrible!

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • Martin from United Kingdom asked:

    Will this conversion fit a SMK CP-1 Multi CO2 Air Pistol? Kind Regards, Martin.

    • Mark from USA:

      No . You can tether a standard 12 or 20 oz CO2 tank but you need a hose to the fill probe.

  • Brian from USA asked:

    How about using it on a hammerli 850

    • Mark from USA:

      The 850 is a CO2 only airgun.

  • Mettle from Canada asked:

    Will this fit a Sig Sauer MCX Co2 ?? Thanks

    • Mark from USA:

      Yes

See all discussions

Compatible with Air Venturi Tank with Adapter, 13 cu in, Aluminum, 3,000 psi

Navigation